curl-curl/src/tool_parsecfg.c

/***************************************************************************
 *                                  _   _ ____  _
 *  Project                     ___| | | |  _ \| |
 *                             / __| | | | |_) | |
 *                            | (__| |_| |  _ <| |___
 *                             \___|\___/|_| \_\_____|
 *
 * Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
 *
 * This software is licensed as described in the file COPYING, which
 * you should have received as part of this distribution. The terms
 * are also available at https://curl.se/docs/copyright.html.
 *
 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
 * copies of the Software, and permit persons to whom the Software is
 * furnished to do so, under the terms of the COPYING file.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 * SPDX-License-Identifier: curl
 *
 ***************************************************************************/
#include "tool_setup.h"

#include "tool_cfgable.h"
#include "tool_getparam.h"
#include "tool_helpers.h"
#include "tool_findfile.h"
#include "tool_msgs.h"
#include "tool_parsecfg.h"
#include "tool_util.h"

/* only acknowledge colon or equals as separators if the option was not
   specified with an initial dash! */
#define ISSEP(x, dash) (!dash && (((x) == '=') || ((x) == ':')))

/*
 * Copies the string from line to the param dynbuf, unquoting backslash-quoted
 * characters and null-terminating the output string. Stops at the first
 * non-backslash-quoted double quote character or the end of the input string.
 * param must be at least as long as the input string. Returns 0 on success.
 */
static int unslashquote(const char *line, struct dynbuf *param)
{
  curlx_dyn_reset(param);

  while(*line && (*line != '\"')) {
    if(*line == '\\') {
      char out;
      line++;

      /* default is to output the letter after the backslash */
      switch(out = *line) {
      case '\0':
        continue; /* this breaks out of the loop */
      case 't':
        out = '\t';
        break;
      case 'n':
        out = '\n';
        break;
      case 'r':
        out = '\r';
        break;
      case 'v':
        out = '\v';
        break;
      }
      if(curlx_dyn_addn(param, &out, 1))
        return 1;
      line++;
    }
    else if(curlx_dyn_addn(param, line++, 1))
      return 1;
  }
  return 0; /* ok */
}

/* return 0 on everything-is-fine, and non-zero otherwise */
ParameterError parseconfig(const char *filename, int max_recursive,
                           char **resolved)
{
  FILE *file = NULL;
  bool usedarg = FALSE;
  ParameterError err = PARAM_OK;
  struct OperationConfig *config = global->last;
  char *pathalloc = NULL;

  if(!filename) {
    /* NULL means load .curlrc from homedir! */
    char *curlrc = findfile(".curlrc", CURLRC_DOTSCORE);
    if(curlrc) {
      file = curlx_fopen(curlrc, FOPEN_READTEXT);
      if(!file) {
        curlx_free(curlrc);
        return PARAM_READ_ERROR;
      }
      filename = pathalloc = curlrc;
    }
#ifdef _WIN32
    else {
      char *fullp;
      /* check for .curlrc then _curlrc in the directory of the executable */
      file = tool_execpath(".curlrc", &fullp);
      if(!file)
        file = tool_execpath("_curlrc", &fullp);
      if(file)
        /* this is the filename we read from */
        filename = fullp;
    }
#endif
  }
  else {
    if(strcmp(filename, "-"))
      file = curlx_fopen(filename, FOPEN_READTEXT);
    else
      file = stdin;
  }

  if(file) {
    char *line;
    char *option;
    char *param;
    int lineno = 0;
    bool dashed_option;
    struct dynbuf buf;
    struct dynbuf pbuf;
    bool fileerror = FALSE;
    curlx_dyn_init(&buf, MAX_CONFIG_LINE_LENGTH);
    curlx_dyn_init(&pbuf, MAX_CONFIG_LINE_LENGTH);
    DEBUGASSERT(filename);

    while(!err && my_get_line(file, &buf, &fileerror)) {
      ParameterError res;
      lineno++;
      line = curlx_dyn_ptr(&buf);
      if(!line) {
        err = PARAM_NO_MEM; /* out of memory */
        break;
      }

      /* the option keywords starts here */
      option = line;

      /* the option starts with a dash? */
      dashed_option = (option[0] == '-');

      while(*line && !ISBLANK(*line) && !ISSEP(*line, dashed_option))
        line++;
      /* ... and has ended here */

      if(*line)
        *line++ = '\0'; /* null-terminate, we have a local copy of the data */

#ifdef DEBUG_CONFIG
      curl_mfprintf(tool_stderr, "GOT: %s\n", option);
#endif

      /* pass spaces and separator(s) */
      while(ISBLANK(*line) || ISSEP(*line, dashed_option))
        line++;

      /* the parameter starts here (unless quoted) */
      if(*line == '\"') {
        /* quoted parameter, do the quote dance */
        int rc = unslashquote(++line, &pbuf);
        if(rc) {
          err = PARAM_BAD_USE;
          break;
        }
        param = curlx_dyn_len(&pbuf) ? curlx_dyn_ptr(&pbuf) : CURL_UNCONST("");
      }
      else {
        param = line; /* parameter starts here */
        while(*line && !ISSPACE(*line)) /* stop also on CRLF */
          line++;

        if(*line) {
          *line = '\0'; /* null-terminate */

          /* to detect mistakes better, see if there is data following */
          line++;
          /* pass all spaces */
          while(ISBLANK(*line))
            line++;

          switch(*line) {
          case '\0':
          case '\r':
          case '\n':
          case '#': /* comment */
            break;
          default:
            warnf("%s:%d: warning: '%s' uses unquoted whitespace. "
                  "This may cause side-effects. Consider double quotes.",
                  filename, lineno, option);
          }
        }
        if(!*param)
          /* do this so getparameter can check for required parameters.
             Otherwise it always thinks there is a parameter. */
          param = NULL;
      }

#ifdef DEBUG_CONFIG
      curl_mfprintf(tool_stderr, "PARAM: \"%s\"\n",(param ? param : "(null)"));
#endif
      res = getparameter(option, param, &usedarg, config, max_recursive);
      config = global->last;

      if(!res && param && *param && !usedarg)
        /* we passed in a parameter that was not used! */
        res = PARAM_GOT_EXTRA_PARAMETER;

      if(res == PARAM_NEXT_OPERATION) {
        if(config->url_list && config->url_list->url) {
          /* Allocate the next config */
          config->next = config_alloc();
          if(config->next) {
            /* Update the last operation pointer */
            global->last = config->next;

            /* Move onto the new config */
            config->next->prev = config;
            config = config->next;
          }
          else
            res = PARAM_NO_MEM;
        }
      }

      if(res != PARAM_OK && res != PARAM_NEXT_OPERATION) {
        /* the help request is not really an error */
        if(!strcmp(filename, "-")) {
          filename = "<stdin>";
        }
        if(res != PARAM_HELP_REQUESTED &&
           res != PARAM_MANUAL_REQUESTED &&
           res != PARAM_VERSION_INFO_REQUESTED &&
           res != PARAM_ENGINES_REQUESTED &&
           res != PARAM_CA_EMBED_REQUESTED) {
          /* only show error in the first level config call */
          if(max_recursive == CONFIG_MAX_LEVELS) {
            const char *reason = param2text(res);
            errorf("%s:%d: '%s' %s", filename, lineno, option, reason);
          }
          err = res;
        }
      }
    }
    curlx_dyn_free(&buf);
    curlx_dyn_free(&pbuf);
    if(file != stdin)
      curlx_fclose(file);
    if(fileerror)
      err = PARAM_READ_ERROR;
  }
  else
    err = PARAM_READ_ERROR; /* could not open the file */

  if((err == PARAM_READ_ERROR) && filename)
    errorf("cannot read config from '%s'", filename);

  if(!err && resolved) {
    *resolved = curlx_strdup(filename);
    if(!*resolved)
      err = PARAM_NO_MEM;
  }
  curlx_free(pathalloc);
  return err;
}

static bool get_line(FILE *input, struct dynbuf *buf, bool *error)
{
  CURLcode result;
  char buffer[128];
  curlx_dyn_reset(buf);
  while(1) {
    const char *b = fgets(buffer, sizeof(buffer), input);

    if(b) {
      size_t rlen = strlen(b);

      if(!rlen)
        break;

      result = curlx_dyn_addn(buf, b, rlen);
      if(result) {
        /* too long line or out of memory */
        *error = TRUE;
        return FALSE; /* error */
      }

      else if(b[rlen-1] == '\n') {
        /* end of the line, drop the newline */
        size_t len = curlx_dyn_len(buf);
        if(len)
          curlx_dyn_setlen(buf, len - 1);
        return TRUE; /* all good */
      }

      else if(feof(input))
        return TRUE; /* all good */
    }
    else if(curlx_dyn_len(buf))
      return TRUE; /* all good */
    else
      break;
  }
  return FALSE;
}

/*
 * Returns a line from the given file. Every line is null-terminated (no
 * newline). Skips #-commented and space/tabs-only lines automatically.
 */
bool my_get_line(FILE *input, struct dynbuf *buf, bool *error)
{
  bool retcode;
  do {
    retcode = get_line(input, buf, error);
    if(!*error && retcode) {
      size_t len = curlx_dyn_len(buf);
      if(len) {
        const char *line = curlx_dyn_ptr(buf);
        while(ISBLANK(*line))
          line++;

        /* a line with # in the first non-blank column is a comment! */
        if((*line == '#') || !*line)
          continue;
      }
      else
        continue; /* avoid returning an empty line */
    }
    break;
  } while(retcode);
  return retcode;
}