When checking to expire a transfer with input data pending, also assess
the blocked status and do not EXPIRE_RUN_NOW a transfer that is blocked
on READ/WRITE.
Follow-up to 62349e45a8#17636Closes#17639
When a transfer is done prematurely, a RST is generated to the server,
but was not send right away due to send buffering.
Flush the send buffer in a best effort when transfer is done.
Reported-by: Michael Kaufmann
Fixes#17611Closes#17638
When multi creates the pollset of a transfer, it checks now if
a connection (FIRST/SECONDARY) socket waits on POLLIN and has input data
pending in filters (relevant to OpenSSL's new read ahead). If so, it
triggers a timeout on the transfer via EXPIRE_RUN_NOW.
This fixes sporadic stalls in test 988 when running event based.
Closes#17636
Introduce an immutable `CURL_FOPEN()` macro to store the `fopen()`
mapping on Windows. Then use that instead `(fopen)` from `memdebug.c`.
It makes CURLDEBUG builds use the correct `fopen` wrapper on Windows.
This macro is only defined on Windows, as of this patch.
This is necessary after cde81e4398,
which no longer applies the default `fopen()` override to `memdebug.c`.
Also:
- curl_setup.h: de-dupe, simplify Windows file I/O function overrides.
- curl_memory.h: fix to reset `fopen` to `curlx_win32_fopen()` on
Windows. Before this patch it reset it to stock `fopen()`.
Follow-up to cde81e4398#17631Closes#16747
Before this patch `memdebug.c` was compiled as a separate source in
unity builds. This was necessary because `memdebug.c` failed to compile
if `memdebug.h` was included before it, in `CURLDEBUG` mode. This patch
fixes this issue and allows to compile `memdebug.c` as part of the unity
source batch. This removes an exception and makes builds perform a notch
better.
- introduce `CURL_SCLOSE()` macro as an immutable synonym of `sclose()`.
- memdebug: replace `sclose()` reference with `CURL_SCLOSE()` to compile
as expected when `sclose()` is overridden by `memdebug.h`.
- memdebug: make it not break when including `memdebug.h` before it in
`CURLDEBUG` mode. Do this by calling low-level functions as
`(function)`.
- autotools, cmake: drop memdebug exception, include it like any other
source file. This is now possible because `memdebug.c` doesn't break
if `memdebug.h` was included before it, in `CURLDEBUG` builds.
- mk-unity: drop `--exclude` option. No longer used after this patch.
- drop `MEMDEBUG_NODEFINES` macro hack. No longer necessary.
Ref: #16747Closes#16746Closes#16738Closes#17631
Instead of relying on CMake's built-in unity feature, use `mk-unity.pl`,
as already done with autotools. It simplified the build, shortens logs
and makes debugging easier because of the fewer build variations.
It also allows testing / fixing with cmake and those automatically apply
to autotools builds too. cmake builds can be much-much faster, esp.
when working the builds themselves.
It also enables "unity" in old cmake versions. Basically every test
target is a single generated .c source.
Also:
- drop a `lib` unity workaround for libtests with autotools after fixing
the issue in libtests itself. It drops a few exceptions and makes
libcurl build faster (in autotools unity).
- fix another `lib` autotools unity issue and drop the workaround for it
from `mk-unity.pl`. `srcdir` was missing from the header path.
- simplify `mk-unity.pl` command-lines, drop exclusions.
Follow-up to 2c27a67daa#17590Closes#17628
Both are available with well-known conditions, under non-Windows, and
`curl/curl.h` already uses them. `sys/time.h` is also necessary for
mingw-w64 for `gettimeofday()`.
Follow-up to 56d5982312#17522Closes#17581
Fix building with `--disable-digest-auth`. Make test cases run in such
a build. Add such a build to our CI jobs.
Reported-by: Tristan Perrault
Fixes#17612Closes#17614
When `curl_easy_cleanup()` is invoked while still being part
of a multi handle, the code will auto-remove it. But since the
connection was detached first, the code in
`curl_multi_remove_handle()` that invalidates dirty connections
did not bite.
Attach the connection *after* the possible remove from a multi
handle, so that connection reuse can be prevented.
Add test753 to reproduce and verify the fix. This required adding
the new debug env var CURL_FTP_PWD_STOP, to have a transfer return
from multi_perform() early with a connection that does not show
and pending input.
Reported-by: Brian Harris
Fixes https://github.com/curl/curl/issues/17578
Closes https://github.com/curl/curl/pull/17607
- Return CURLE_OK if the engine successfully loaded.
Prior to this change:
When loading an openssl engine, the result code is initialized to
CURLE_SSL_ENGINE_NOTFOUND, but is never set to CURLE_OK when the engine
was successfully loaded. This causes curl to error out, falsely stating
engine not found when it actually was.
Broken since f2ce6c46 (precedes 8.14.0) which added support for using
engines and providers at the same time.
Fixes https://github.com/curl/curl/issues/17617
Closes https://github.com/curl/curl/pull/17618
- Align --cacert behaviour with OpenSSL and LibreSSL.
This changes the default behavior of Schannel manual certificate
verification, which is used when the user provides their own CA
certificates for verification, to accept partial chains. In other words,
the user may provide an intermediate certificate without having to
provide the root CA.
Win8/Server2012 widened the PKIX chain traversal API to allow
certificate traversal to terminate at an intermediate.
This behaviour (terminate at the fist matching intermediate) is the
default for LibreSSL and OpenSSL (with OpenSSL allowing control via
CURLSSLOPT_NO_PARTIALCHAIN).
This change uses the new API if it is available, and also allows the
behaviour to revert legacy if CURLSSLOPT_NO_PARTIALCHAIN is present.
Closes https://github.com/curl/curl/pull/17418
Make test bundles the default. Drop non-bundle build mode.
Also do all the optimizations and tidy-ups this allows, simpler builds,
less bundle exceptions, streamlined build mechanics.
Also rework the init/deinit macro magic for unit tests. The new method
allows using unique init/deinit function names, and calling them with
arguments. This is in turn makes it possible to reduce the use of global
variables.
Note this drop existing build options `-DCURL_TEST_BUNDLES=` from cmake
and `--enable-test-bundles` / `--disable-test-bundles` from autotools.
Also:
- rename test entry functions to have unique names: `test_<testname>`
This removes the last exception that was handled in the generator.
- fix `make dist` to not miss test sources with test bundles enabled.
- sync and merge `tests/mk-bundle.pl` into `scripts/mk-unity.pl`.
- mk-unity.pl: add `--embed` option and use it when `CURL_CLANG_TIDY=ON`
to ensure that `clang-tidy` does not miss external test C sources.
(because `clang-tidy` ignores code that's #included.)
- tests/unit: drop no-op setup/stop functions.
- tests: reduce symbol scopes, global macros, other fixes and tidy-ups.
- tool1621: fix to run, also fix it to pass.
- sockfilt: fix Windows compiler warning in certain unity include order,
by explicitly including `warnless.h`.
Follow-up to 6897aeb105#17468Closes#17590
`SSL_pending()` only checks if the *current* TLS packet has more data.
There might be more data in SSL's buffers.
`SSL_has_pending()` only checks if there is data in buffers, but does
*not* check if there is a complete TLS packet that can be decoded.
If we only check the first, we will poll on socket events without having
processed all data and may stall. If we only check the second, we would
busy loop without SSL_read() ever giving something.
Add the flag `connssl->input_pending` that is set on incoming data in
the BIO receive. Clear the flag when encountering a CURLE_AGAIN on
the filters receive (via SSL_read()) or see an EOF.
Ref: #17596Closes#17601
The secure transport vTLS backend was the only Curl_ssl struct instance
that populated the false_start field. Since its removed, we can now
remove that field entirely. This was a protocol feature specific to TLS
1.2 that has been replaced by the more widely adopted TLS 1.3 early data
mechanisms.
--false-start is now deprecated
Closes#17595
Since the code now checks for NULL and returns before this point, 'ntlm'
cannot be NULL at this point in the code. Pointed out by Coverity.
Follow-up to 5586520745Closes#17587
cfilter/conn: change send/recv function signatures. Unify the
calling/return conventions in our send/receive handling.
Curl_conn_recv(), adjust pnread type
Parameter `pnread` was a `ssize_t *`, but `size_t *` is better since the
function returns any error in its `CURLcode` return value.
Closes#17546
Convert the debug-only handling of SSL_ERROR_SYSCALL so that it is
enabled in all builds with openssl. This should not make a difference in
supported OpenSSL versions, but if whatever version or fork we link
against *does* return SSL_ERROR_SYSCALL, handle this as a fatal error.
Fixes#17471
Reported-by: Michael Kaufmann
Closes#17531
The checks for a connection being "too long idle" or "too old" where
rounding down the elapsed time to seconds before comparing to the
configured max values. This caused connections to be reused for up to
999ms longer than intended.
Change the compares to scale the configured seconds up to ms, so
connection will properly be "too old" 1 ms after the coonfigured values.
Fixes sporadic failures of test1542 on platforms where "sleep(2)"
returnes before 2 full seconds on the internal clock where passed.
Reported-by: Christian Weisgerber
URL: https://curl.se/mail/lib-2025-06/0004.htmlCloses#17571
These libraries do not support TLS 1.3 and have been marked for removal
for over a year. We want to help users select a TLS dependency that is
future-proof and reliable, and not supporting TLS 1.3 in 2025 does not
infer confidence. Users who build libcurl are likely to be served better
and get something more future-proof with a TLS library that supports
1.3.
Closes#16677
Delete macros from `curl_config.h.cmake` that were never set by
the CMake script: `_LARGE_FILES`, `_THREAD_SAFE`, `const`, `size_t`.
Also:
- lib/config-riscos.h: drop `#undef _LARGE_FILES`. This is an
IBM-specific macro, no need to unset it on other platforms.
Cherry-picked from #17576Closes#17580
- replace dynamic `InitSecurityInterface()` call with early binding and
link `secur32` system DLL.
The library and function are available in all supported curl Windows
targets, meaning WinXP or newer. Add small hack for mingw32ce to
make it build.
- detect and use `if_nametoindex()` on Windows when available. Link
`iphlpapi` system DLL. Requires targeting Vista or newer.
Replacing the dynamic call and the pre-load optimization for lib3026.
Suggested-by: Jay Satiro
Closes#17413
Remove structs for negotiate, krb5, ntlm and gsasl from connectdata and
store them as connection meta data with auto cleanup.
De-complexify sasl mech selection by moving code into static functions.
Closes#17557
When a pingpong based protocol tries to perform a connection disconnect,
it sends a sort of "logout" command to the server, unless the connection
is deemed dead.
But the disconnect might happen before pingpong data has been completely
sent, in which case sending the "logout" will not work. Check the
pingpong state and do not "logout" when data is pending.
This was detected as a condition in fuzzing that triggered a debug
assert in the pingpong sending.
Closes#17555
The ssh libraries do not reveal if they still have data buffered from
the peer. Only when their buffers are read empty can curl be sure that
it is safe to rely on socket polling.
This change adds detection of EGAIN on receive in the transfer loop and
allows SFTP/SCP transfers to avoid a busy loop in such a case (which
should happen often when CPU exceeds network bandwidth).
Closes#17533
This started out as regression tests for the `curl_ws_recv()` and
`curl_ws_send()` implementation and ended up with a bugfix, additional
protocol validation and minor logging improvements.
- Fix reset of fragmented message decoder state when a PING/PONG is
received in between message fragments.
- Fix undefined behavior (applying zero offset to null pointer) in
curl_ws_send() when the given buffer is NULL.
- Detect invalid overlong PING/PONG/CLOSE frames.
- Detect invalid fragmented PING/PONG/CLOSE frames.
- Detect invalid sequences of fragmented frames.
- a) A continuation frame (0x80...) is received without any ongoing
fragmented message.
- b) A new fragmented message is started (0x81/0x01/0x82/0x02...)
before the ongoing fragmented message has terminated.
- Made logs for invalid opcodes easier to understand.
- Moved noisy logs to the `CURL_TRC_WS` log level.
- Unified the prefixes for WebSocket log messages: `[WS] ...`
- Add env var `CURL_WS_FORCE_ZERO_MASK` in debug builds.
- If set, it forces the bit mask applied to outgoing payloads to
0x00000000, which effectively means the payload is not masked at
all. This drastically simplifies defining the expected `<protocol>`
data in test cases.
- 2700: Frame types
- 2701: Invalid opcode 0x3
- 2702: Invalid opcode 0xB
- 2703: Invalid reserved bit RSV1 _(replaces 2310)_
- 2704: Invalid reserved bit RSV2
- 2705: Invalid reserved bit RSV3
- 2706: Invalid masked server message
- 2707: Peculiar frame sizes _(part. replaces 2311)_
- 2708: Automatic PONG
- 2709: No automatic PONG _(replaces 2312)_
- 2710: Unsolicited PONG
- 2711: Empty PING/PONG/CLOSE
- 2712: Max sized PING/PONG/CLOSE
- 2713: Invalid oversized PING _(replaces 2307)_
- 2714: Invalid oversized PONG
- 2715: Invalid oversized CLOSE
- 2716: Invalid fragmented PING
- 2717: Invalid fragmented PONG
- 2718: Invalid fragmented CLOSE
- 2719: Fragmented messages _(part. replaces 2311)_
- 2720: Fragmented messages with empty fragments
- 2721: Fragmented messages with interleaved pong
- 2722: Invalid fragmented message without initial frame
- 2723: Invalid fragmented message without final frame
- 2305: curl_ws_recv() loop reading three larger frames
- This test involuntarily sent an invalid sequence of opcodes (0x01...,0x01...,0x81...) , but neither libcurl nor the test caught this! The correct sequence was tested in 2311 (0x01...,0x00...,0x80...). See below for 2311.
- Validation of the opcode sequence was added to libcurl and is now tested in 2723.
- Superseded by 2719 (fragmented message) and 2707 (large frames).
- 2307: overlong PING payload
- The tested PING payload length check was actually missing, but the test didn't catch this since it involuntarily sent an invalid opcode (0x19... instead of 0x89...) so that the expected error occurred, but for the wrong reason.
- Superseded by 2713.
- 2310: unknown reserved bit set in frame header
- Superseded by 2703 and extended by 2704 and 2705.
- 2311: curl_ws_recv() read fragmented message
- Superseded by 2719 (fragmented message) and 2707 (large frames).
- 2312: WebSockets no auto ping
- Superseded by 2709.
- No tests for `CURLOPT_WRITEFUNCTION`.
- No tests for sending of invalid frames/fragments.
Closes#17136
Instead of curl.haxx.se
Also widen the .gitignore for libtest, since it missed libtest751,
so ignore three digit tests that start with 5-9 instead of just 5-6.
Closes#17502
When ftp_done() is called to terminate the transfer, it needs to tear
down any open SECONDARY filter chain. The condition on when to do that
was relying on there to be a valid socket. This is not sufficient as the
socket is only set *after* happy eyeballing has decided on one.
Instead of checking for a valid conn->sock, check if any connection
filter is installed.
Fixes#17482
Reported-by: Rasmus Melchior Jacobsen
Closes#17491
With a dash, using two Ls. Also for different forms of the word.
Use NULL in all uppercase if it means a zero pointer.
Follow-up to 307b7543eaCloses#17489
Early data was reported as being sent, but was not. While everything was
aligned with the Gods and early data was reported as accepted, the
actual sending required another call to wolfSSL.
Fixes#17481
Reported-by: Ethan Everett
Closes#17488
