`getsock()` calls operated on a global limit that could
not be configure beyond 16 sockets. This is no longer adequate
with the new happy eyeballing strategy.
Instead, do the following:
- make `struct easy_pollset` dynamic. Starting with
a minimal room for two sockets, the very common case,
allow it to grow on demand.
- replace all protocol handler getsock() calls with pollsets
and a CURLcode to return failures
- add CURLcode return for all connection filter `adjust_pollset()`
callbacks, since they too can now fail.
- use appropriately in multi.c and multi_ev.c
- fix unit2600 to trigger pollset growth
Closes#18164
Instead of using integer seconds. Also: if the cache contains over
30,000 entries after first pruning, it makes anoter round and removes
all entries that are older than half the age of the oldest entry until
it goes below 30,000.
Closes#18160
Add a case with 1 ipv4 and 3 ipv6 and check that all are attempted with
the correct minimum duration before failures. To check that more ipv6
than ipv4 lead to the correct behaviour.
Closes#18144
When `CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS` expires, start the next ip
connect attempt, but keep all ongoing attempts alive.
Separate happy-eyeballs connection filter into own source files.
Closes#18105
- bump format strings to show the full value, drop casts.
- drop redundant casts (enum -> `%d`).
- drop some single-use macros.
- replace `int` with `bool` in testtrace.
Closes#18106
- tests: merge cmake commands.
- tests: use `target_compile_definitions()`.
- tests/server: use generator expression for platform-specific macro.
- tests/unit: sync `Makefile.am` comment with cmake.
- tests/unit: merge two `AM_CPPFLAGS` lines to keep synced with cmake.
- tests: move macro definitions to `first.h` headers from build level.
`CURL_NO_OLDIES`, `CURL_DISABLE_DEPRECATION`, `WITHOUT_LIBCURL`,
`CURL_STATICLIB` (for servers).
To share more logic.
Pass `CURL_STATICLIB` in server on all platforms for simplicity.
(On non-Windows, it's a no-op. It's already done like this with curlu
and libcurltool.)
Also for lib:
- lib: merge commands.
- lib: sync macro order with tests (also in `Makefile.am`).
Closes#17768
Collision happens when building with mingw-w64 v3 or v2 while targeting
Vista or newer. `iphlpapi.h` includes `windns.h` in this case, which
defines macros named `DNS_TYPE_*`, colliding with curl doh enums.
The issue was fixed in mingw-w64 v4:
ea95d55e33
Fixes:
```
lib/doh.h:54:3: error: expected identifier before numeric constant
DNS_TYPE_A = 1,
^
```
Ref: https://github.com/curl/curl/actions/runs/16551209676/job/46806303365?pr=18009#step:10:17
This workaround seems harmless and generally good practice, but
another option is to require mingw-w64 v4.
Ref: #18009Closes#18041
- codespell: break logic out into its own runnable script. Allowing
to run it on local machines.
- codespell: install via `pip`, bump to latest version.
- codespell: show version number in CI log.
- codespell: drop no longer needed word exception: `msdos`.
- codespell: include all curl source tree, except `packages` and
`winbuild`. Drop an obsolete file exclusion.
- add new spellchecker job using the `typos` tool. It includes
the codespell dictionary and a couple more. Use linuxbrew to install
it. This takes 10 seconds, while installing via `cargo` from source
would take over a minute.
- codespell: introduce an inline ignore filter compatible with `cspell`
Make `typos` recognize it, too. Move single exceptions inline.
Fix new typos found. Also rename variables and words to keep
spellchecking exceptions at minumum. This involves touching some tests.
Also switch base64 strings to `%b64[]` to avoid false positives.
Ref: https://github.com/crate-ci/typos/blob/master/docs/reference.md
Ref: https://github.com/codespell-project/codespell?tab=readme-ov-file#inline-ignore
Ref: https://github.com/codespell-project/codespell/issues/1212#issuecomment-1721152455
Ref: https://cspell.org/docs/Configuration/document-settingsCloses#17905
To simplify dependencies, and sync tunits and units builds further.
`curlcheck.h` already depended on logic implemented within libtests:
it referenced a global variable (`unitfail`) defined in `first.c` and
declared in `test.h`.
Also:
- rename to `unitcheck.h` to indicate it's meant for unit tests.
- make `unitcheck.h` include `first.h` instead of `test.h`.
This brings header use closer to libtests. It also includes
`curlx/curlx.h` for all unit tests by default now.
- move `unitfail` declaration from `test.h` to `first.h`.
To match its definition in `first.c`.
- drop now redundant per-test curlx header includes.
Closes#17868
This test makes sure that a number of internal and public structs are
within their maximum allowed size limits.
The public structs can only grow in controlled ways, while the internal
ones may be allowed to grow if deemed right.
The idea here is to control, to know and make sure all important struct
growth is intentional.
Closes#17823
To make `ninja units-clang-tidy` target work without manually building
core components first.
Also rename the clang-tidy test target generator macro to align its name
with the built-in `add_custom_target()` function.
Follow-up to c9bb9cd165#17750Closes#17810
In order to do unit tests for private functions, functions that are
marked UNITTEST but without a global scope in the library, functions
that do not have prototypes in their corresponding header file, unit
tests previously brought their own private prototype *copy* into the
unit test.
This was error-prone when the internal function changes but the change
might be missed in the unit test which then uses an outdated prototype
copy for testing.
This change removes the private prototypes from unit tests and instead
introduces a C file parser that parses the specific C files and extracts
the necessary unit test prototypes into a generated header file for unit
tests to use. This geneated lib/unitprotos.h header is then included by
unit tests that need private prototypes.
Assisted-by: Viktor Szakats
Closes#17750
Change the signature of `bufq` functions from
* `ssize_t Curl_bufq_*(..., CURLcode *err)` to
* `CURLcode Curl_bufq_*(..., size_t *pn)`
This allows us to write slightly less code and avoids the ssize_t/size_t
conversions in many cases. Also, it gets the function in line with all
the other send/recv signatures.
Added helper functions in `cfilters.h` for sending from/receving into
a bufq.
Fuzzer now fails to build due to these changes and its testing of
the bufq API.
Closes#17396
It allows to pass `.h` files only where they are really needed, which is
`EXTRA_DIST` (or `*SOURCES`) for autotools.
Also:
- rename variables to be shorter and consistent.
- drop references to non-local headers. We don't need to pass them as
dist sources.
- drop empty variables and references, after the above.
- server: add placeholder `UTIL_H`.
Closes#17745
- markup some functions UNITTEST, so that they are static unless in a
unit test build
- make some functions #ifdef UNITTESTS as they are only used from unit
tests
- adjusted unit tests accordingly to use local prototypes for functions
not global in the library
Closes#17734
To make all src and test code refer to curlx headers the same way.
Also:
- src: move `curlx.h` include to `tool_setup.h`.
- src/tool_setup.h: drop stray `curlx/timeval.h`.
- servers: de-duplicate `curlx.h` and `curl_setup.h` includes.
- libtests, units: drop stray curlx sub-headers in favor of
`<curlx/curlx.h>`.
- tests: include `curlx.h` with `<>` instead of `""`. To match
other parts of the codebase.
Closes#17680
Replace existing `mk-unity.pl` `--embed` workaround with running
`clang-tidy` manually on individual test source instead. This aligns
with how clang-tidy works and removes `mk-unity.pl` from the solution.
Also:
- mqttd: fix potentially uninitialized buffer by zero filling it.
```
tests/server/mqttd.c:484:41: error: The left operand of '<<' is a garbage value
[clang-analyzer-core.UndefinedBinaryOperatorResult,-warnings-as-errors]
484 | payload_len = (size_t)(buffer[10] << 8) | buffer[11];
| ^
[...]
tests/server/mqttd.c:606:45: error: The left operand of '<<' is a garbage value
[clang-analyzer-core.UndefinedBinaryOperatorResult,-warnings-as-errors]
606 | topiclen = (size_t)(buffer[1 + bytes] << 8) | buffer[2 + bytes];
| ^
```
- sockfilt: fix potential out-of-bound pointer:
```
tests/server/sockfilt.c:1128:33: error: The 2nd argument to 'send' is a buffer
with size 17010 but should be a buffer with size equal to or greater than
the value of the 3rd argument (which is 18446744073709551615)
[clang-analyzer-unix.StdCLibraryFunctions,-warnings-as-errors]
1128 | ssize_t bytes_written = swrite(sockfd, buffer, buffer_len);
| ^
```
- clang-tidy: suppress bogus `bzero()` warnings that happens
inside the notorious `FD_ZERO()` macros, on macOS.
Ref: https://github.com/curl/curl/pull/17680#issuecomment-2991730158Closes#17705
Connection filters had a method `get_host()` which had not really been
documented. Since then, the cf had the `query()` method added. Replace
the separate get_host with query.
Add `CF_QUERY_HOST_PORT` as query to connection filters to retrieve
which remote hostname and port the filter (or its sub-filter) is talking
to. The query is implemented by HTTP and SOCKS filters, all others pass
it through.
Add `Curl_conn_get_current_host()` to retrieve the remote host and port
for a connection. During connect, this will return the host the
connection is talking to right now. Before/After connect, this will
return `conn->host.name`.
This is used by SASL authentication.
Closes#17419
Derive it from `$BUNDLE` instead. autotools seems to be already relying
on `$BUNDLE_SRC` being equal to `$BUNDLE.c`. (I haven't realized this
before aaebb45f58b3f62876a68c17c71ac37d98f1b3bb.)
Also drop redundant `nodist_<target>_SOURCE` lines in tunits and units.
Follow-up to aaebb45f58#17688
Follow-up to 2c27a67daa#17590Closes#17692
The `#undef` hack is no longer necessary after changing the redifitions
to not map back to the original symbols.
This makes it unnecessary to repeat the redefinitions after compiling
`warnless.c` itself (in unity mode).
Which in turns makes it unnecessary to include `warnless.h` again, to
trigger such redefinition.
This also means that `read`/`write` are now redefined on Windows from
the first inclusion of `warnless.h`.
Also:
- tests/server: drop a repeat `warnless.h` include, that is unnecessary
after this patch.
- tests/unit: drop repeat `warnless.h` include.
- tests/libtest: drop repeat `warnless.h` includes.
- tests/libtest: formatting.
Follow-up to 2f312a14da#17619
Follow-up to 84338c4de2#12331
Follow-up to 6239146e93Closes#17673
Use it from libtests' `first.c` and thus also from units, and tunits.
Also:
- cmake: drop stray `curltool` lib dependency for units.
- units: stop depending on `src` headers.
- tests/server: drop depending on `src` headers.
(the remaining one listed in the comments, `tool_xattr.h`, was not
actually used from servers.)
- tests/server: drop duplicate curlx headers.
(Except `warnless.h`, which is tricky on Windows.)
Closes#17672
To reduce the diff between tests CMakeFiles.txt, and syncing with
autotools, which already used the `BUNDLE` variable like this.
Also:
- fold lines that went over 132 chars after this change.
- autotools: sync order of macros with cmake.
Closes#17667
- GHA/windows: make a mingw autotools build static only.
- GHA/windows: fix a CI script issue with the build above.
- src: fix to pass `LIBCURL_PC_LIBS_PRIVATE` instead of `LINKFLAGS`.
This makes the libs propagate to tunits, making the local hack there
unnecessary. `LINKFLAGS` had this single use in the repo, and it was
empty in local tests.
- tests: drop passing redundant `LIBCURL_PC_LDFLAGS_PRIVATE`.
- tests: drop redundant target name from config variables.
- examples, tests/client: drop `LIBDIR` temp variables with single uses.
- examples, tests: formatting to sync `Makefile.am` scripts with each
other.
Closes#17661
Instead of relying on CMake's built-in unity feature, use `mk-unity.pl`,
as already done with autotools. It simplified the build, shortens logs
and makes debugging easier because of the fewer build variations.
It also allows testing / fixing with cmake and those automatically apply
to autotools builds too. cmake builds can be much-much faster, esp.
when working the builds themselves.
It also enables "unity" in old cmake versions. Basically every test
target is a single generated .c source.
Also:
- drop a `lib` unity workaround for libtests with autotools after fixing
the issue in libtests itself. It drops a few exceptions and makes
libcurl build faster (in autotools unity).
- fix another `lib` autotools unity issue and drop the workaround for it
from `mk-unity.pl`. `srcdir` was missing from the header path.
- simplify `mk-unity.pl` command-lines, drop exclusions.
Follow-up to 2c27a67daa#17590Closes#17628
Make test bundles the default. Drop non-bundle build mode.
Also do all the optimizations and tidy-ups this allows, simpler builds,
less bundle exceptions, streamlined build mechanics.
Also rework the init/deinit macro magic for unit tests. The new method
allows using unique init/deinit function names, and calling them with
arguments. This is in turn makes it possible to reduce the use of global
variables.
Note this drop existing build options `-DCURL_TEST_BUNDLES=` from cmake
and `--enable-test-bundles` / `--disable-test-bundles` from autotools.
Also:
- rename test entry functions to have unique names: `test_<testname>`
This removes the last exception that was handled in the generator.
- fix `make dist` to not miss test sources with test bundles enabled.
- sync and merge `tests/mk-bundle.pl` into `scripts/mk-unity.pl`.
- mk-unity.pl: add `--embed` option and use it when `CURL_CLANG_TIDY=ON`
to ensure that `clang-tidy` does not miss external test C sources.
(because `clang-tidy` ignores code that's #included.)
- tests/unit: drop no-op setup/stop functions.
- tests: reduce symbol scopes, global macros, other fixes and tidy-ups.
- tool1621: fix to run, also fix it to pass.
- sockfilt: fix Windows compiler warning in certain unity include order,
by explicitly including `warnless.h`.
Follow-up to 6897aeb105#17468Closes#17590
These libraries do not support TLS 1.3 and have been marked for removal
for over a year. We want to help users select a TLS dependency that is
future-proof and reliable, and not supporting TLS 1.3 in 2025 does not
infer confidence. Users who build libcurl are likely to be served better
and get something more future-proof with a TLS library that supports
1.3.
Closes#16677
Using a mixture of techniques to avoid symbols collisions:
- reduce scope.
- add `t*_` / `T*_` prefix.
- move shared functions to `testutil.c`.
(`suburl()`, `rlim2str()`)
- clone re-used lib*.c sources.
(lib587, lib645)
- include shared symbols just once in re-used `lib*.c` sources.
(using `LIB*_C` guards.)
- drop re-used `lib*.c` sources where they were identical or
unused.
- make macros global.
- #undef macros before use.
What remain is the entry functions `test`, and `unit_setup`,
`unit_stop` in unit tests.
Also:
- fix formatting and other minor things along the way.
- add `const` where possible.
- sync some symbol names between tests.
- drop `mk-bundle-hints.sh` that's no longer necessary.
Closes#17468
