Tweaks around handling of --limit-rate:
* tracing: trace outstanding timeouts by name
* multi: do not mark transfer as dirty that have
an EXPIRE_TOOFAST set
* multi: have one static function to asses speed limits
* multi: when setting EXPIRE_TOOFAST remove the transfers
from the dirty set
* progress: rename vars and comment on how speed limit
timeouts are calculated, for clarity
* transfer: when speed limiting, exit the receive loop
after a quarter of the limit has been received, not
on the first chunk received.
* cf-ip-happy.c: clear EXPIRE_HAPPY_EYEBALLS on connect
* scorecard: add --limit-rate parameter to test with
speed limits in effect
Closes#18454
Since they are mostly independent, using them as bitfelds makes the code
easier.
- remove the unused struct field 'width'.
- convert 'speeder_c' to an unsigned char from int
Closes#17431
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
- Fix logic typo.
Prior to this change the overflow check was reversed, meaning it did
not stop an overflow condition and also if there wasn't an overflow it
erroneously set the total expected transfer size to the maximum value.
Follow-up to 69ce9a7f from earlier today.
Closes https://github.com/curl/curl/pull/17213
Let CURLINFO_QUEUE_TIME_T count only the time a transfer spends queued,
including possible redirect requests.
Add var 'time_queue' for reporting the time in write outs.
Add test for verifying correct reporting.
Closes#15512
Based on #14135, implement TLSv1.3 earlydata support for the curl
command line, libcurl and its implementation in GnuTLS.
If a known TLS session announces early data support, and the feature is
enabled *and* it is not a "connect-only" transfer, delay the TLS
handshake until the first request is being sent.
- Add --tls-earldata as new boolean command line option for curl.
- Add CURLSSLOPT_EARLYDATA to libcurl to enable use of the feature.
- Add CURLINFO_EARLYDATA_SENT_T to libcurl, reporting the amount of
bytes sent and accepted/rejected by the server.
Implementation details:
- store the ALPN protocol selected at the SSL session.
- When reusing the session and enabling earlydata, use exactly
that ALPN protocol for negoptiation with the server. When the
sessions ALPN does not match the connections ALPN, earlydata
will not be enabled.
- Check that the server selected the correct ALPN protocol for
an earlydata connect. If the server does not confirm or reports
something different, the connect fails.
- HTTP/2: delay sending the initial SETTINGS frames during connect,
if not connect-only.
Verification:
- add test_02_32 to verify earlydata GET with nghttpx.
- add test_07_70 to verify earlydata PUT with nghttpx.
- add support in 'hx-download', 'hx-upload' clients for the feature
Assisted-by: ad-chaos on github
Closes#15211
booleans should use the type 'bool' and set the value to TRUE/FALSE
non-booleans should not be 'bool' and should not set the value to
TRUE/FALSE
Closes#15123
- multi.c: when ratelimiting a transfer stops (MSTATE_RATELIMITING ->
MSTATE_PERFORMING), run the MSTATE_PERFORMING state right away
- urldata.h: factor out upload and download progress counters into a
struct, use that for passing these to progress update functions
- progress.c/getinfo.c: change names of moved progress counters
- progress.c: use new structs and a helper struct to factor repeated
calculation into static helpers
Closes#14335
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
Returns the time, in microseconds, during which this transfer was held
in a waiting queue before it started "for real". A transfer might be put
in a queue if after getting started, it cannot create a new connection
etc due to set conditions and limits imposed by the application.
Ref: #12293Closes#12368
... as there is nothing to wait for then, it just waits. Otherwise, this
causes much more CPU work and updates than necessary during ratelimit
periods.
Ref: https://curl.se/mail/lib-2023-11/0056.htmlCloses#12430
This PR has these changes:
Renaming of unencode_* to cwriter, e.g. client writers
- documentation of sendf.h functions
- move max decode stack checks back to content_encoding.c
- define writer phase which was used as order before
- introduce phases for monitoring inbetween decode phases
- offering default implementations for init/write/close
Add type paramter to client writer's do_write()
- always pass all writes through the writer stack
- writers who only care about BODY data will pass other writes unchanged
add RAW and PROTOCOL client writers
- RAW used for Curl_debug() logging of CURLINFO_DATA_IN
- PROTOCOL used for updates to data->req.bytecount, max_filesize checks and
Curl_pgrsSetDownloadCounter()
- remove all updates of data->req.bytecount and calls to
Curl_pgrsSetDownloadCounter() and Curl_debug() from other code
- adjust test457 expected output to no longer see the excess write
Closes#12184
Previously it would only stop them from getting started if the size is
known to be too big then.
Update the libcurl and curl docs accordingly.
Fixes#11810
Reported-by: Elliot Killick
Assisted-by: Jay Satiro
Closes#11820
New cfilter HTTP-CONNECT for h3/h2/http1.1 eyeballing.
- filter is installed when `--http3` in the tool is used (or
the equivalent CURLOPT_ done in the library)
- starts a QUIC/HTTP/3 connect right away. Should that not
succeed after 100ms (subject to change), a parallel attempt
is started for HTTP/2 and HTTP/1.1 via TCP
- both attempts are subject to IPv6/IPv4 eyeballing, same
as happens for other connections
- tie timeout to the ip-version HAPPY_EYEBALLS_TIMEOUT
- use a `soft` timeout at half the value. When the soft timeout
expires, the HTTPS-CONNECT filter checks if the QUIC filter
has received any data from the server. If not, it will start
the HTTP/2 attempt.
HTTP/3(ngtcp2) improvements.
- setting call_data in all cfilter calls similar to http/2 and vtls filters
for use in callback where no stream data is available.
- returning CURLE_PARTIAL_FILE for prematurely terminated transfers
- enabling pytest test_05 for h3
- shifting functionality to "connect" UDP sockets from ngtcp2
implementation into the udp socket cfilter. Because unconnected
UDP sockets are weird. For example they error when adding to a
pollset.
HTTP/3(quiche) improvements.
- fixed upload bug in quiche implementation, now passes 251 and pytest
- error codes on stream RESET
- improved debug logs
- handling of DRAIN during connect
- limiting pending event queue
HTTP/2 cfilter improvements.
- use LOG_CF macros for dynamic logging in debug build
- fix CURLcode on RST streams to be CURLE_PARTIAL_FILE
- enable pytest test_05 for h2
- fix upload pytests and improve parallel transfer performance.
GOAWAY handling for ngtcp2/quiche
- during connect, when the remote server refuses to accept new connections
and closes immediately (so the local conn goes into DRAIN phase), the
connection is torn down and a another attempt is made after a short grace
period.
This is the behaviour observed with nghttpx when we tell it to shut
down gracefully. Tested in pytest test_03_02.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
- new tests/tests-httpd/scorecard.py for testing h3/h2 protocol implementation.
Invoke:
python3 tests/tests-httpd/scorecard.py --help
for usage.
Improvements on gathering connect statistics and socket access.
- new CF_CTRL_CONN_REPORT_STATS cfilter control for having cfilters
report connection statistics. This is triggered when the connection
has completely connected.
- new void Curl_pgrsTimeWas(..) method to report a timer update with
a timestamp of when it happend. This allows for updating timers
"later", e.g. a connect statistic after full connectivity has been
reached.
- in case of HTTP eyeballing, the previous changes will update
statistics only from the filter chain that "won" the eyeballing.
- new cfilter query CF_QUERY_SOCKET for retrieving the socket used
by a filter chain.
Added methods Curl_conn_cf_get_socket() and Curl_conn_get_socket()
for convenient use of this query.
- Change VTLS backend to query their sub-filters for the socket when
checks during the handshake are made.
HTTP/3 documentation on how https eyeballing works.
TLS improvements
- ALPN selection for SSL/SSL-PROXY filters in one vtls set of functions, replaces
copy of logic in all tls backends.
- standardized the infof logging of offered ALPNs
- ALPN negotiated: have common function for all backends that sets alpn proprty
and connection related things based on the negotiated protocol (or lack thereof).
Scorecard with Caddy.
- configure can be run with `--with-test-caddy=path` to specify which caddy to use for testing
- tests/tests-httpd/scorecard.py now measures download speeds with caddy
pytest improvements
- adding Makfile to clean gen dir
- adding nghttpx rundir creation on start
- checking httpd version 2.4.55 for test_05 cases where it is needed. Skipping with message if too old.
- catch exception when checking for caddy existance on system.
Closes#10349
- they are mostly pointless in all major jurisdictions
- many big corporations and projects already don't use them
- saves us from pointless churn
- git keeps history for us
- the year range is kept in COPYING
checksrc is updated to allow non-year using copyright statements
Closes#10205
Add licensing and copyright information for all files in this repository. This
either happens in the file itself as a comment header or in the file
`.reuse/dep5`.
This commit also adds a Github workflow to check pull requests and adapts
copyright.pl to the changes.
Closes#8869
Otherwise the old value would linger from a previous use and would mess
up the network speed cap logic.
Reported-by: Ymir1711 on github
Fixes#7042Closes#7043
By setting the speed limit time stamps unconditionally at transfer
start, we can start off a transfer without speed limits and yet allow
them to get set during transfer and have an effect.
Reported-by: Kael1117 on github
Fixes#6162Closes#6184
Setting a timeout to INT_MAX could cause an immediate error to get
returned as timeout because of an overflow when different values of
'now' were used.
This is primarily fixed by having Curl_pgrsTime() return the "now" when
TIMER_STARTSINGLE is set so that the parent function will continue using
that time.
Reported-by: Ionuț-Francisc Oancea
Fixes#5583Closes#5847
... to make CURLOPT_MAX_RECV_SPEED_LARGE and
CURLOPT_MAX_SEND_SPEED_LARGE work correctly on subsequent transfers that
reuse the same handle.
Fixed-by: Ironbars13 on github
Fixes#4084Closes#4161
This reverts commit 3b06e68b77.
Clearly this change wasn't good enough as it broke CURLOPT_LOW_SPEED_LIMIT +
CURLOPT_LOW_SPEED_TIME
Reported-by: Dave Reisner
Fixes#3927Closes#3928
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
The function does not return the same value as snprintf() normally does,
so readers may be mislead into thinking the code works differently than
it actually does. A different function name makes this easier to detect.
Reported-by: Tomas Hoger
Assisted-by: Daniel Gustafsson
Fixes#3296Closes#3297
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes#2631
Due to very frequent updates of the rate limit "window", it could
attempt to rate limit within the same milliseconds and that then made
the calculations wrong, leading to it not behaving correctly on very
fast transfers.
This new logic updates the rate limit "window" to be no shorter than the
last three seconds and only updating the timestamps for this when
switching between the states TOOFAST/PERFORM.
Reported-by: 刘佩东
Fixes#2386Closes#2388
