When a SCP/SFTP connection calls the protocol handler disconnect, it
required the connections *and* the easy handles SSH meta data to be
present. When the disconnect is called with an admin handle, the easy
meta data is not present, which prevented the shutdown to run.
The easy meta data is however not necessary to run the shutdown state
machine. Calling it with a NULL `sshp` is fine. To avoid any mixups,
check `sshp` in state operations that need it.
Fixes#19293
Reported-by: And-yW on github
Closes#19295
If there is lingering letters left on the right side after the paths
have been parsed, they are syntactically incorrect so returning error is
the safe thing to do.
Reported-by: Harry Sintonen
Closes#19030
The libssh API uses a 32 bit type for datestamp, so instead of just
force-typecast it, make sure it gets capped at UINT_MAX if the value is
larger.
Reported-by: Joshua Rogers
Closes#18989
Opening the remote file with O_APPEND while attempting to resume causes
all writes to be forced to EOF on servers/implementations where O_APPEND
semantics override a prior seek(). As a result, sftp_seek64() is ignored
and the resumed data is appended, duplicating/corrupting the file.
Fix by:
- Using O_WRONLY (without O_APPEND) when resume_from > 0.
- Skipping the seek entirely if remote_append mode is requested.
Closes#18952
After this patch, the codebase no longer overrides system printf
functions. Instead it explicitly calls either the curl printf functions
`curl_m*printf()` or the system ones using their original names.
Also:
- drop unused `curl_printf.h` includes.
- checksrc: ban system printf functions, allow where necessary.
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814Closes#18866
Reported in macOS clang-tidy v21.1.1 build, after enabling libssh in it:
```
lib/vssh/libssh.c
lib/vssh/libssh.c:1342:9: error: Value stored to 'to_t' is never read [clang-analyzer-deadcode.DeadStores,-warnings-as-errors]
1342 | to_t = STRE_OK;
| ^
lib/vssh/libssh.c:1342:9: note: Value stored to 'to_t' is never read
lib/vssh/libssh.c:1349:9: error: Value stored to 'from_t' is never read [clang-analyzer-deadcode.DeadStores,-warnings-as-errors]
1349 | from_t = STRE_OK;
| ^
lib/vssh/libssh.c:1349:9: note: Value stored to 'from_t' is never read
2 warnings generated.
```
Ref: https://github.com/curl/curl/actions/runs/17909917954/job/50918955923?pr=18660#step:11:182
Cherry-picked from #18660Closes#18684
The range-parsing returned CURLE_RANGE_ERROR directly on one error
instead of calling myssh_to_ERROR() like it should and like it does for
all other errors.
Reported in Joshua's sarif data
Closes#18652
The code called set sshc->nextstate and returned SSH_OK without setting
sshc->actualcode to an error code.
Reported in Joshua's sarif data
Closes#18637
By returning error separately on parse errors and avoiding magic
numbers, this function can now return 0 or -1 as proper dates when such
a date string is provided.
Closes#18445
Deduce that the transfer response expects headers by the protocol
handler implementing `write_resp_hd` callback. This eleminates the
`getheader` parameter in the `Curl_xfer_setup_*()` methods.
Add an implementation to RTSP for `write_resp_hd`, joining the HTTP
protocol in the only handlers having it.
Reverse the default of request's `header` bit that signals that headers
are expected. Default is now FALSE, set to TRUE when setting up the
transfer by presence of `write_resp_hd` in the protocol handler.
Closes#18218
Make variants for transfers that send/receive or do both with just the
parameters they need. Split out the shutdown setting into a separate
function. Only FTP bothers with that.
Closes#18203
The `connectdata` members `sockfd` and `writesockfd` needed to by either
CURL_SOCKET_BAD or a copy of one of `conn->sock[2]`. When equal to one,
that index was used to send/recv/poll the proper socket or connection
filter chain.
Replace those with `send_idx` and `recv_idx` which are either -1, 0 or 1
to indicate which socket/filter to send/receive on.
Closes#18179
`getsock()` calls operated on a global limit that could
not be configure beyond 16 sockets. This is no longer adequate
with the new happy eyeballing strategy.
Instead, do the following:
- make `struct easy_pollset` dynamic. Starting with
a minimal room for two sockets, the very common case,
allow it to grow on demand.
- replace all protocol handler getsock() calls with pollsets
and a CURLcode to return failures
- add CURLcode return for all connection filter `adjust_pollset()`
callbacks, since they too can now fail.
- use appropriately in multi.c and multi_ev.c
- fix unit2600 to trigger pollset growth
Closes#18164
This commit replaces the usage of the old deprecated sftp_async API with
the new sftp_aio API for remote file reading.
Signed-off-by: Eshan Kelkar <eshankelkar@galorithm.com>
Closes#17440
- vtls: fix unused variable and symbols.
- ftp: fix unused variable.
- http: fix unused variables.
- smtp: fix unsued variable.
- wolfssl: fix unused variable with !proxy.
- libssh: fix unused argument.
- curl_trc: sync guards between declaration and definition.
- curl_trc: add missing guard for `Curl_trc_ssls` when !verbose.
- curl_trc: fix errors with !http + http3.
- curl_trc: fix missing function with !http + nghttp2.
- cf-h2-proxy: disable when !http + nghttp2, to avoid calling undeclared
functions.
- sha256: fix missing declaration in rare configs.
- md4: fix symbol conflict when building GnuTLS together with AWS-LC or
wolfSSL. By prioritizing the latter two. AWS-LC has no option
to disable the clashing symbol. wolfSSL does, but the most seamless is
to skip including GnuTLS's standalone `md4.h` to avoid the clash.
- build: fix errors with !http + nghttp2.
- build: catch !ssl + ssls-export combination in source. Convert
build-level errors to warnings.
- build: fix errors with !http + http3.
- build: fix building curl tool and unit1302 in rare combinations.
By always compiling base64 curlx functions.
- cmake: add `_CURL_SKIP_BUILD_CERTS` internal option.
To disable automatically building certs with the testdeps target.
To improve performance when testing builds.
(used locally to find the failing builds fixed in this PR.)
Closes#17962
Drop `strcasecompare` and `strncasecompare` in favor of libcurl API
calls `curl_strequal` and `curl_strnequal` respectively.
Also drop unnecessary `strcase.h` includes. Include `curl/curl.h`
instead where it wasn't included before.
Closes#17772
Add a bitset `dirty` to the multi handle. The presence of a transfer int
he "dirty" set means: this transfer has something to do ASAP.
"dirty" is set by multiplexing protocols like HTTP/2 and 3 when
encountering response data for another transfer than the current one.
"dirty" is set by protocols that want to be called.
Implementation:
* just an additional `uint_bset` in the multi handle
* `Curl_multi_mark_dirty()` to add a transfer to the dirty set.
* `multi_runsingle()` clears the dirty bit of the transfer at
start. Without new dirty marks, this empties the set after
al dirty transfers have been run.
* `multi_timeout()` immediately gives the current time and
timeout_ms == 0 when dirty transfers are present.
* multi_event: marks all transfers tracked for a socket as dirty.
Then marks all expired transfers as dirty. Then it runs
all dirty transfers.
With this mechanism:
* Most uses of `EXPIRE_RUN_NOW` are replaced by `Curl_multi_mark_dirty()`
* `Curl_multi_mark_dirty()` is cheaper than querying if a transfer is
already dirty or set for timeout. There is no need to check, just do it.
* `data->state.select_bits` is eliminated. We need no longer to
simulate a poll event to make a transfer run.
Closes#17662
In the unlikely case that no SSH auth methods are supported, the
previous code would return 0 from myssh_in_AUTH_PKEY_INIT. However,
following the code path, it seems like it should be returning SSH_ERROR,
as set in myssh_to_ERROR (through myssh_to_GSSAPI_AUTH,
myssh_to_KEY_AUTH and myssh_to_PASSWD_AUTH).
In actuality, this is unlikely to occur, as the similar code in
myssh_in_AUTHLIST would have already returned an error in this scenario.
However setting a return value and then ignoring it is a bit fishy and
should be documented if this is intended.
I believe this used to return an error, but was changed in the recent
re-factoring of this code.
Closes#17691
cfilter/conn: change send/recv function signatures. Unify the
calling/return conventions in our send/receive handling.
Curl_conn_recv(), adjust pnread type
Parameter `pnread` was a `ssize_t *`, but `size_t *` is better since the
function returns any error in its `CURLcode` return value.
Closes#17546
This reduces the "complexity score" for myssh_statemach_act from 160 to
100, taking it down from the most complex function in libcurl to the
5th.
Also fixes a memory leak of the sftp session.
Closes#17346
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
by including headers using "../[header]" when done from C files in
subdirectories, we do not need to specify the lib source dir as an
include path and we reduce the risk of header name collisions with
headers in the SDK using the same file names.
Idea-by: Kai Pastor
Ref: #16949Closes#16991
Add a DEBUGASSERT() in Curl_dyn_free() that checks that Curl_dyn_init()
has been performed before.
Fix code places that did it wrong.
Fixes#16725Closes#16775
Fix the broken implementation to have `data->state` carry pointers into
connectdata members. Always dup the memory and free when easy handle
closes.
Closes#16733
ssh's disconnect assumed that the session to the server could be shut
down successfully during disconnect. When this failed, e.g. timed out,
memory was leaked.
Closes#16659
The issues found fell into these categories, with the applied fixes:
- const was accidentally stripped.
Adjust code to not cast or cast with const.
- const/volatile missing from arguments, local variables.
Constify arguments or variables, adjust/delete casts. Small code
changes in a few places.
- const must be stripped because an API dependency requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our control. These happen at API boundaries. Sometimes they depend
on dependency version, which this patch handles as necessary. Also
enable const support for the zlib API, using `ZLIB_CONST`. Supported
by zlib 1.2.5.2 and newer.
- const must be stripped because a curl API requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our immediate control. For example we promise to send a non-const
argument to a callback, though the data is const internally.
- other cases where we may avoid const stripping by code changes.
Also silenced with `CURL_UNCONST()`.
- there are 3 places where `CURL_UNCONST()` is cast again to const.
To silence this type of warning:
```
lib/vquic/curl_osslq.c:1015:29: error: to be safe all intermediate
pointers in cast from 'unsigned char **' to 'const unsigned char **'
must be 'const' qualified [-Werror=cast-qual]
lib/cf-socket.c:734:32: error: to be safe all intermediate pointers in
cast from 'char **' to 'const char **' must be 'const' qualified
[-Werror=cast-qual]
```
There may be a better solution, but I couldn't find it.
These cases are handled in separate subcommits, but without further
markup.
If you see a `-Wcast-qual` warning in curl, we appreciate your report
about it.
Closes#16142
They have always been documented in lowercase. They have never been
claimed to be case insensitive. They mostly map to unix counterparts
that are always lowercase. Switch to case sensitive checks: lowercase.
Closes#16382
