After this patch, the codebase no longer overrides system printf
functions. Instead it explicitly calls either the curl printf functions
`curl_m*printf()` or the system ones using their original names.
Also:
- drop unused `curl_printf.h` includes.
- checksrc: ban system printf functions, allow where necessary.
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814Closes#18866
i is taken from pointer[length-2] (often the IAC byte) before we do
length -= 2, so using pointer[i] indexes an arbitrary/stale byte
unrelated to the option code. pointer[0] is the suboption’s option code
per the telnet SB format, so printing pointer[0] yields correct, stable
diagnostics.
Closes#18851
- GHA/checkdocs: rename `spellcheck` job to `pyspelling` to say
the exact tool used.
- GHA/checkdocs: restore a comment.
- GHA/linux: add `-B .` to a cmake configure to avoid warning, and
future breakage.
- autotools: use correct casing for `Schannel`.
- doh: update RFC URL.
- drop redundant parenthesis.
- fix indentation, whitespace.
Closes#18756
Ban the use of IAC (0xff) in telnet options set by the application. They
need to be escaped when sent but I can't see any valid reason for an
application to send them.
Of course, an application sending such data basically ask for trouble.
Reported in Joshua's sarif data
Closes#18657
`getsock()` calls operated on a global limit that could
not be configure beyond 16 sockets. This is no longer adequate
with the new happy eyeballing strategy.
Instead, do the following:
- make `struct easy_pollset` dynamic. Starting with
a minimal room for two sockets, the very common case,
allow it to grow on demand.
- replace all protocol handler getsock() calls with pollsets
and a CURLcode to return failures
- add CURLcode return for all connection filter `adjust_pollset()`
callbacks, since they too can now fail.
- use appropriately in multi.c and multi_ev.c
- fix unit2600 to trigger pollset growth
Closes#18164
Drop `strcasecompare` and `strncasecompare` in favor of libcurl API
calls `curl_strequal` and `curl_strnequal` respectively.
Also drop unnecessary `strcase.h` includes. Include `curl/curl.h`
instead where it wasn't included before.
Closes#17772
cfilter/conn: change send/recv function signatures. Unify the
calling/return conventions in our send/receive handling.
Curl_conn_recv(), adjust pnread type
Parameter `pnread` was a `ssize_t *`, but `size_t *` is better since the
function returns any error in its `CURLcode` return value.
Closes#17546
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
Before this patch, standard `E*` errno codes were redefined on Windows,
onto matching winsock2 `WSA*` error codes, which have different values.
This broke uses where using the `E*` value in non-socket context, or
other places expecting a POSIX `errno`, e.g. file I/O, threads, IDN or
interfacing with dependencies.
Fix it by introducing a curl-specific `SOCKE*` set of macros that map to
`WSA*` on Windows and standard POSIX codes on other platforms. Then
verify and update the code to use `SOCKE*` or `E*` macro depending on
context.
- Add `SOCKE*` macros that map to either winsock2 or POSIX error codes.
And use them with `SOCKERRNO` or in contexts requiring
platform-dependent socket error codes.
This fixes `E*` uses which were supposed be POSIX values, not `WSA*`
socket errors, on Windows:
- lib/curl_multibyte.c
- lib/curl_threads.c
- lib/idn.c
- lib/vtls/gtls.c
- lib/vtls/rustls.c
- src/tool_cb_wrt.c
- src/tool_dirhie.c
- Ban `E*` codes having a `SOCKE*` mapping, via checksrc.
Authored-by: Daniel Stenberg
- Add exceptions for `E*` codes used in file I/O, or other contexts
requiring POSIX error codes.
Also:
- ftp: fix missing `SOCKEACCES` mapping for Windows.
- add `SOCKENOMEM` for `Curl_getaddrinfo()` via `asyn-thread.c`.
- tests/server/sockfilt: fix to set `SOCKERRNO` in local `select()`
override on Windows.
- lib/inet_ntop: fix to return `WSAEINVAL` on Windows, where `ENOSPC` is
used on other platforms. To simulate Windows' built-in `inet_ntop()`,
as tested on a Win10 machine.
Note:
- WINE returns `STATUS_INVALID_PARAMETER` = `0xC000000D`.
- Microsoft documentation says it returns `WSA_INVALID_PARAMETER`
(= `ERROR_INVALID_PARAMETER`) 87:
https://learn.microsoft.com/windows/win32/api/ws2tcpip/nf-ws2tcpip-inet_ntop#return-value
- lib/inet_ntop: drop redundant `CURL_SETERRNO(ENOSPC)`.
`inet_ntop4()` already sets it before returning `NULL`.
- replace stray `WSAEWOULDBLOCK` with `USE_WINSOCK` macro to detect
winsock2.
- move existing `SOCKE*` mappings from `tests/server` to
`curl_setup_once.h`.
- add missing `EINTR`, `EINVAL` constants for WinCE.
Follow-up to abf80aae38#16612
Follow-up to d69425ed7d#16615
Bug: https://github.com/curl/curl/pull/16553#issuecomment-2704679377Closes#16621
The issues found fell into these categories, with the applied fixes:
- const was accidentally stripped.
Adjust code to not cast or cast with const.
- const/volatile missing from arguments, local variables.
Constify arguments or variables, adjust/delete casts. Small code
changes in a few places.
- const must be stripped because an API dependency requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our control. These happen at API boundaries. Sometimes they depend
on dependency version, which this patch handles as necessary. Also
enable const support for the zlib API, using `ZLIB_CONST`. Supported
by zlib 1.2.5.2 and newer.
- const must be stripped because a curl API requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our immediate control. For example we promise to send a non-const
argument to a callback, though the data is const internally.
- other cases where we may avoid const stripping by code changes.
Also silenced with `CURL_UNCONST()`.
- there are 3 places where `CURL_UNCONST()` is cast again to const.
To silence this type of warning:
```
lib/vquic/curl_osslq.c:1015:29: error: to be safe all intermediate
pointers in cast from 'unsigned char **' to 'const unsigned char **'
must be 'const' qualified [-Werror=cast-qual]
lib/cf-socket.c:734:32: error: to be safe all intermediate pointers in
cast from 'char **' to 'const char **' must be 'const' qualified
[-Werror=cast-qual]
```
There may be a better solution, but I couldn't find it.
These cases are handled in separate subcommits, but without further
markup.
If you see a `-Wcast-qual` warning in curl, we appreciate your report
about it.
Closes#16142
- add hex and octal parsers to the Curl_str_* family
- make curlx_strtoofft use these parsers
- remove all use of strtol() and strtoul() in library code
- generally use Curl_str_* more than strtoofft, for stricter parsing
- supports 64-bit universally, instead of 'long' which differs in size
between platforms
Extended the unit test 1664 to verify hex and octal parsing.
Closes#16336
Instead of strtoul() and strtol() calls.
Easier API with better integer overflow detection and built-in max check
that now comes automatic everywhere this is used.
Closes#16319
Adds a `follow()` callback to protocol handlers, so they may decide how
to act on a `newurl` after a request has been done. This is optional.
This moves the HTTP code for handling redirects from multi.c to http.c
where it should be. If we ever add a protocol with its own logic, it
would install its own follow function.
Closes#16075
Coverity CID 1638753 correctly identies this code misbehaved if the
passed in suboption is exactly one byte long by substracting two from
the unsigned size_t variable.
Closes#15987
Use these words and casing more consistently across text, comments and
one curl tool output:
AIX, ALPN, ANSI, BSD, Cygwin, Darwin, FreeBSD, GitHub, HP-UX, Linux,
macOS, MS-DOS, MSYS, MinGW, NTLM, POSIX, Solaris, UNIX, Unix, Unicode,
WINE, WebDAV, Win32, winbind, WinIDN, Windows, Windows CE, Winsock.
Mostly OS names and a few more.
Also a couple of other minor text fixups.
Closes#14360
Adds a `bool eos` flag to send methods to indicate that the data
is the last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers
are not yet fully flushed.
Closes#14220
Adds a `bool eos` flag to send methods to indicate that the data is the
last chunk the invovled transfer wants to send to the server.
This will help protocol filters like HTTP/2 and 3 to forward the
stream's EOF flag and also allow to EAGAIN such calls when buffers are
not yet fully flushed.
Closes#14220
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- clarify Curl_xfer_setup() with RECV/SEND flags and different calls for
which socket they operate on. Add a shutdown flag for secondary
sockets
- change Curl_xfer_setup() calls to new functions
- implement non-blocking connection shutdown at the end of receiving or
sending a transfer
Closes#13913
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to
clarify when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer
setup of `conn->sockfd` and `conn->writesockfd` on which
connection filter chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index
as parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for
naming consistency
- clarify that the special CURLE_AGAIN hangling to return
`CURLE_OK` with length 0 only applies to `Curl_xfer_send()`
and CURLE_AGAIN is returned by all other send() variants.
- fix a bug in websocket `curl_ws_recv()` that mixed up data
when it arrived in more than a single chunk
The method for sending not just raw bytes, but bytes that are either
"headers" or "body". The send abstraction stack, to to bottom, now is:
* `Curl_req_send()`: has parameter to indicate amount of header bytes,
buffers all data.
* `Curl_xfer_send()`: knows on which socket index to send, returns
amount of bytes sent.
* `Curl_conn_send()`: called with socket index, returns amount of bytes
sent.
In addition there is `Curl_req_flush()` for writing out all buffered
bytes.
`Curl_req_send()` is active for requests without body,
`Curl_buffer_send()` still being used for others. This is because the
special quirks need to be addressed in future parts:
* `expect-100` handling
* `Curl_fillreadbuffer()` needs to add directly to the new
`data->req.sendbuf`
* special body handlings, like `chunked` encodings and line end
conversions will be moved into something like a Client Reader.
In functions of the pattern `CURLcode xxx_send(..., ssize_t *written)`,
replace the `ssize_t` with a `size_t`. It makes no sense to allow for negative
values as the returned `CURLcode` already specifies error conditions. This
allows easier handling of lengths without casting.
Closes#12964
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
This clarifies the handling of server responses by folding the code for
the complicated protocols into their protocol handlers. This concerns
mainly HTTP and its bastard sibling RTSP.
The terms "read" and "write" are often used without clear context if
they refer to the connect or the client/application side of a
transfer. This PR uses "read/write" for operations on the client side
and "send/receive" for the connection, e.g. server side. If this is
considered useful, we can revisit renaming of further methods in another
PR.
Curl's protocol handler `readwrite()` method been changed:
```diff
- CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn,
- const char *buf, size_t blen,
- size_t *pconsumed, bool *readmore);
+ CURLcode (*write_resp)(struct Curl_easy *data, const char *buf, size_t blen,
+ bool is_eos, bool *done);
```
The name was changed to clarify that this writes reponse data to the
client side. The parameter changes are:
* `conn` removed as it always operates on `data->conn`
* `pconsumed` removed as the method needs to handle all data on success
* `readmore` removed as no longer necessary
* `is_eos` as indicator that this is the last call for the transfer
response (end-of-stream).
* `done` TRUE on return iff the transfer response is to be treated as
finished
This change affects many files only because of updated comments in
handlers that provide no implementation. The real change is that the
HTTP protocol handlers now provide an implementation.
The HTTP protocol handlers `write_resp()` implementation will get passed
**all** raw data of a server response for the transfer. The HTTP/1.x
formatted status and headers, as well as the undecoded response
body. `Curl_http_write_resp_hds()` is used internally to parse the
response headers and pass them on. This method is public as the RTSP
protocol handler also uses it.
HTTP/1.1 "chunked" transport encoding is now part of the general
*content encoding* writer stack, just like other encodings. A new flag
`CLIENTWRITE_EOS` was added for the last client write. This allows
writers to verify that they are in a valid end state. The chunked
decoder will check if it indeed has seen the last chunk.
The general response handling in `transfer.c:466` happens in function
`readwrite_data()`. This mainly operates now like:
```
static CURLcode readwrite_data(data, ...)
{
do {
Curl_xfer_recv_resp(data, buf)
...
Curl_xfer_write_resp(data, buf)
...
} while(interested);
...
}
```
All the response data handling is implemented in
`Curl_xfer_write_resp()`. It calls the protocol handler's `write_resp()`
implementation if available, or does the default behaviour.
All raw response data needs to pass through this function. Which also
means that anyone in possession of such data may call
`Curl_xfer_write_resp()`.
Closes#12480
https://best.openssf.org/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C++.html
as of 2023-11-29 [1].
Enable new recommended warnings (except `-Wsign-conversion`):
- enable `-Wformat=2` for clang (in both cmake and autotools).
- add `CURL_PRINTF()` internal attribute and mark functions accepting
printf arguments with it. This is a copy of existing
`CURL_TEMP_PRINTF()` but using `__printf__` to make it compatible
with redefinting the `printf` symbol:
https://gcc.gnu.org/onlinedocs/gcc-3.0.4/gcc_5.html#SEC94
- fix `CURL_PRINTF()` and existing `CURL_TEMP_PRINTF()` for
mingw-w64 and enable it on this platform.
- enable `-Wimplicit-fallthrough`.
- enable `-Wtrampolines`.
- add `-Wsign-conversion` commented with a FIXME.
- cmake: enable `-pedantic-errors` the way we do it with autotools.
Follow-up to d5c0351055#2747
- lib/curl_trc.h: use `CURL_FORMAT()`, this also fixes it to enable format
checks. Previously it was always disabled due to the internal `printf`
macro.
Fix them:
- fix bug where an `set_ipv6_v6only()` call was missed in builds with
`--disable-verbose` / `CURL_DISABLE_VERBOSE_STRINGS=ON`.
- add internal `FALLTHROUGH()` macro.
- replace obsolete fall-through comments with `FALLTHROUGH()`.
- fix fallthrough markups: Delete redundant ones (showing up as
warnings in most cases). Add missing ones. Fix indentation.
- silence `-Wformat-nonliteral` warnings with llvm/clang.
- fix one `-Wformat-nonliteral` warning.
- fix new `-Wformat` and `-Wformat-security` warnings.
- fix `CURL_FORMAT_SOCKET_T` value for mingw-w64. Also move its
definition to `lib/curl_setup.h` allowing use in `tests/server`.
- lib: fix two wrongly passed string arguments in log outputs.
Co-authored-by: Jay Satiro
- fix new `-Wformat` warnings on mingw-w64.
[1] 56c0fde389/docs/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C%2B%2B.mdCloses#12489
Previously it would only stop them from getting started if the size is
known to be too big then.
Update the libcurl and curl docs accordingly.
Fixes#11810
Reported-by: Elliot Killick
Assisted-by: Jay Satiro
Closes#11820
- refs #11342 where errors with git https interactions
were observed
- problem was caused by 1st sends of size larger than 64KB
which resulted in later retries of 64KB only
- limit sending of 1st block to 64KB
- adjust h2/h3 filters to cope with parsing the HTTP/1.1
formatted request in chunks
- introducing Curl_nwrite() as companion to Curl_write()
for the many cases where the sockindex is already known
Fixes#11342 (again)
Closes#11803
- add an `id` long to Curl_easy, -1 on init
- once added to a multi (or its own multi), it gets
a non-negative number assigned by the connection cache
- `id` is unique among all transfers using the same
cache until reaching LONG_MAX where it will wrap
around. So, not unique eternally.
- CURLINFO_CONN_ID returns the connection id attached to
data or, if none present, data->state.lastconnect_id
- variables and type declared in tool for write out
Closes#11185
