Custom IMAP commands using -X (e.g. 'FETCH 123 BODY[1]') were only
returning the first line of responses containing literals, instead of
the full multi-line body data.
The issue was that custom commands route through imap_perform_list()
and imap_state_listsearch_resp(), which didn't detect or handle IMAP
literal syntax {size}.
This commit adds literal detection to imap_state_listsearch_resp():
- Detects literal syntax {size} in untagged responses
- Writes the response header line containing the literal marker
- Handles any literal body data already in the pingpong buffer
- Sets up transfer layer to read remaining literal data from socket
- Configures maxdownload and transfer size to include header + body
- Initializes pp->overflow to 0 when no buffered data present
- Modifies imap_done() to transition to FETCH_FINAL for custom
commands that set up downloads
Test 841 and 3206 verify.
Fixes#18847
Reported-by: BohwaZ
Bug: https://github.com/curl/curl/issues/18847Closes#19246
Protocol handlers not flagging PROTOPT_SSL that allow reuse of existing
SSL connections now need to carry the flag PROTOPT_SSL_REUSE.
Add PROTOPT_SSL_REUSE to imap, ldap, pop3, smtp and ftp.
Add tests the http: urls do not reuse https: connections and vice versa.
Reported-by: Sakthi SK
Fixes#19006Closes#19007
After this patch, the codebase no longer overrides system printf
functions. Instead it explicitly calls either the curl printf functions
`curl_m*printf()` or the system ones using their original names.
Also:
- drop unused `curl_printf.h` includes.
- checksrc: ban system printf functions, allow where necessary.
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814Closes#18866
Deduce that the transfer response expects headers by the protocol
handler implementing `write_resp_hd` callback. This eleminates the
`getheader` parameter in the `Curl_xfer_setup_*()` methods.
Add an implementation to RTSP for `write_resp_hd`, joining the HTTP
protocol in the only handlers having it.
Reverse the default of request's `header` bit that signals that headers
are expected. Default is now FALSE, set to TRUE when setting up the
transfer by presence of `write_resp_hd` in the protocol handler.
Closes#18218
Make variants for transfers that send/receive or do both with just the
parameters they need. Split out the shutdown setting into a separate
function. Only FTP bothers with that.
Closes#18203
`getsock()` calls operated on a global limit that could
not be configure beyond 16 sockets. This is no longer adequate
with the new happy eyeballing strategy.
Instead, do the following:
- make `struct easy_pollset` dynamic. Starting with
a minimal room for two sockets, the very common case,
allow it to grow on demand.
- replace all protocol handler getsock() calls with pollsets
and a CURLcode to return failures
- add CURLcode return for all connection filter `adjust_pollset()`
callbacks, since they too can now fail.
- use appropriately in multi.c and multi_ev.c
- fix unit2600 to trigger pollset growth
Closes#18164
Drop `strcasecompare` and `strncasecompare` in favor of libcurl API
calls `curl_strequal` and `curl_strnequal` respectively.
Also drop unnecessary `strcase.h` includes. Include `curl/curl.h`
instead where it wasn't included before.
Closes#17772
Add a bitset `dirty` to the multi handle. The presence of a transfer int
he "dirty" set means: this transfer has something to do ASAP.
"dirty" is set by multiplexing protocols like HTTP/2 and 3 when
encountering response data for another transfer than the current one.
"dirty" is set by protocols that want to be called.
Implementation:
* just an additional `uint_bset` in the multi handle
* `Curl_multi_mark_dirty()` to add a transfer to the dirty set.
* `multi_runsingle()` clears the dirty bit of the transfer at
start. Without new dirty marks, this empties the set after
al dirty transfers have been run.
* `multi_timeout()` immediately gives the current time and
timeout_ms == 0 when dirty transfers are present.
* multi_event: marks all transfers tracked for a socket as dirty.
Then marks all expired transfers as dirty. Then it runs
all dirty transfers.
With this mechanism:
* Most uses of `EXPIRE_RUN_NOW` are replaced by `Curl_multi_mark_dirty()`
* `Curl_multi_mark_dirty()` is cheaper than querying if a transfer is
already dirty or set for timeout. There is no need to check, just do it.
* `data->state.select_bits` is eliminated. We need no longer to
simulate a poll event to make a transfer run.
Closes#17662
Remove structs for negotiate, krb5, ntlm and gsasl from connectdata and
store them as connection meta data with auto cleanup.
De-complexify sasl mech selection by moving code into static functions.
Closes#17557
When a pingpong based protocol tries to perform a connection disconnect,
it sends a sort of "logout" command to the server, unless the connection
is deemed dead.
But the disconnect might happen before pingpong data has been completely
sent, in which case sending the "logout" will not work. Check the
pingpong state and do not "logout" when data is pending.
This was detected as a condition in fuzzing that triggered a debug
assert in the pingpong sending.
Closes#17555
When SASL is unable to select an AUTH mechanism, give user help
in info message why no AUTH could be selected.
Fixes#17420Closes#17427
Reported-by: Aditya Garg
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
Remove the imap protocol structs from connectdata->proto union
and data->req.p and use the easy handle/connection meta hash
for keeping them.
Closes#17261
Add a DEBUGASSERT() in Curl_dyn_free() that checks that Curl_dyn_init()
has been performed before.
Fix code places that did it wrong.
Fixes#16725Closes#16775
In curl 8.12 I tried to improve the logic on how we handle connections
that "upgrade" to TLS later, e.g. with a STARTTLS. I found the existing
code hard to read in this regard. But of course, the "improvements" blew
up in my face.
We fixed issues with imap, opo3, smtp in 8.12.1, but ftp was no longer
reusing existing, upgraded control connections as before. This PR adds
checks in our pytest FTP tests that verify reuse is happening as
intended.
I rewrote the logic in url.c again, so that the new test checks now pass.
Reported-by: Zenju on github
Fixes#16384Closes#16392
- add hex and octal parsers to the Curl_str_* family
- make curlx_strtoofft use these parsers
- remove all use of strtol() and strtoul() in library code
- generally use Curl_str_* more than strtoofft, for stricter parsing
- supports 64-bit universally, instead of 'long' which differs in size
between platforms
Extended the unit test 1664 to verify hex and octal parsing.
Closes#16336
Instead of strtoul() and strtol() calls.
Easier API with better integer overflow detection and built-in max check
that now comes automatic everywhere this is used.
Closes#16319
There were two places in the code that tried to connect the SSL filter,
e.g. do the TLS handshake, but only one changed imap state to CAPA
afterwards.
Depending on timing, the wrong path was taken and the connection was
hanging, waiting for a server reply to a command not sent.
Do the upgrade to tls in one place and update connection filter and
smtps protocol handler at the same time. Always transition to CAPA on
success.
Closes#16213
Adds a `follow()` callback to protocol handlers, so they may decide how
to act on a `newurl` after a request has been done. This is optional.
This moves the HTTP code for handling redirects from multi.c to http.c
where it should be. If we ever add a protocol with its own logic, it
would install its own follow function.
Closes#16075
Protocol handler option PROTOPT_SSL is used to setup a connection
filters. Once that is done, used `Curl_conn_is_ssl()` to check if
a connection uses SSL.
There may be other reasons to add SSL to a connection, e.g. starttls.
Closes#16034
booleans should use the type 'bool' and set the value to TRUE/FALSE
non-booleans should not be 'bool' and should not set the value to
TRUE/FALSE
Closes#15123
Based on the standards and guidelines we use for our documentation.
- expand contractions (they're => they are etc)
- host name = > hostname
- file name => filename
- user name = username
- man page => manpage
- run-time => runtime
- set-up => setup
- back-end => backend
- a HTTP => an HTTP
- Two spaces after a period => one space after period
Closes#14073
- clarify Curl_xfer_setup() with RECV/SEND flags and different calls for
which socket they operate on. Add a shutdown flag for secondary
sockets
- change Curl_xfer_setup() calls to new functions
- implement non-blocking connection shutdown at the end of receiving or
sending a transfer
Closes#13913
Add `mime` client reader. Encapsulates reading from mime parts, getting
their length, rewinding and unpausing.
- remove special mime handling from sendf.c and easy.c
- add general "unpause" method to client readers
- use new reader in http/imap/smtp
- make some mime functions static that are now only used internally
In addition:
- remove flag 'forbidchunk' as no longer needed
Closes#13039
Curl_read/Curl_write clarifications
- replace `Curl_read()`, `Curl_write()` and `Curl_nwrite()` to 1clarify
when and at what level they operate
- send/recv of transfer related data is now done via
`Curl_xfer_send()/Curl_xfer_recv()` which no longer has
socket/socketindex as parameter. It decides on the transfer setup of
`conn->sockfd` and `conn->writesockfd` on which connection filter
chain to operate.
- send/recv on a specific connection filter chain is done via
`Curl_conn_send()/Curl_conn_recv()` which get the socket index as
parameter.
- rename `Curl_setup_transfer()` to `Curl_xfer_setup()` for naming
consistency
- clarify that the special CURLE_AGAIN handling to return `CURLE_OK`
with length 0 only applies to `Curl_xfer_send()` and CURLE_AGAIN is
returned by all other send() variants.
SingleRequest reshuffling
- move functions into request.[ch]
- differentiate between reset and free
- add Curl_req_done() to perform last actions
- add a send `bufq` to SingleRequest for future use in keeping upload data
Closes#12963
Remove curl_mimepart object from UserDefined structure when
CURL_DISABLE_MIME flag is active. Reduce size of UserDefined structure.
Also remove unreachable code: when CURL_DISABLE_MIME is set, httpreq can
never have HTTPREQ_POST_MIME value and the same goes for the
CURL_DISABLE_FORM_API flag and the HTTPREQ_POST_FORM value
Closes#12948
The pingpong logic now uses its own dynbuf for receiving command
response data.
When the "final" response header for a commanad has been received, that
final line is left first in the recvbuf for the protocols to parse at
will. If there is additional data behind the final response line, the
'overflow' counter is indicate how many bytes.
Closes#12757
This clarifies the handling of server responses by folding the code for
the complicated protocols into their protocol handlers. This concerns
mainly HTTP and its bastard sibling RTSP.
The terms "read" and "write" are often used without clear context if
they refer to the connect or the client/application side of a
transfer. This PR uses "read/write" for operations on the client side
and "send/receive" for the connection, e.g. server side. If this is
considered useful, we can revisit renaming of further methods in another
PR.
Curl's protocol handler `readwrite()` method been changed:
```diff
- CURLcode (*readwrite)(struct Curl_easy *data, struct connectdata *conn,
- const char *buf, size_t blen,
- size_t *pconsumed, bool *readmore);
+ CURLcode (*write_resp)(struct Curl_easy *data, const char *buf, size_t blen,
+ bool is_eos, bool *done);
```
The name was changed to clarify that this writes reponse data to the
client side. The parameter changes are:
* `conn` removed as it always operates on `data->conn`
* `pconsumed` removed as the method needs to handle all data on success
* `readmore` removed as no longer necessary
* `is_eos` as indicator that this is the last call for the transfer
response (end-of-stream).
* `done` TRUE on return iff the transfer response is to be treated as
finished
This change affects many files only because of updated comments in
handlers that provide no implementation. The real change is that the
HTTP protocol handlers now provide an implementation.
The HTTP protocol handlers `write_resp()` implementation will get passed
**all** raw data of a server response for the transfer. The HTTP/1.x
formatted status and headers, as well as the undecoded response
body. `Curl_http_write_resp_hds()` is used internally to parse the
response headers and pass them on. This method is public as the RTSP
protocol handler also uses it.
HTTP/1.1 "chunked" transport encoding is now part of the general
*content encoding* writer stack, just like other encodings. A new flag
`CLIENTWRITE_EOS` was added for the last client write. This allows
writers to verify that they are in a valid end state. The chunked
decoder will check if it indeed has seen the last chunk.
The general response handling in `transfer.c:466` happens in function
`readwrite_data()`. This mainly operates now like:
```
static CURLcode readwrite_data(data, ...)
{
do {
Curl_xfer_recv_resp(data, buf)
...
Curl_xfer_write_resp(data, buf)
...
} while(interested);
...
}
```
All the response data handling is implemented in
`Curl_xfer_write_resp()`. It calls the protocol handler's `write_resp()`
implementation if available, or does the default behaviour.
All raw response data needs to pass through this function. Which also
means that anyone in possession of such data may call
`Curl_xfer_write_resp()`.
Closes#12480
- memdebug: update to not trigger `-Wformat-nonliteral` warnings.
- imap: mark `imap_sendf()` with `CURL_PRINTF()`.
- tool_msgs: mark static function with `CURL_PRINTF()`.
Follow-up to 3829759bd0#12489Closes#12540
https://best.openssf.org/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C++.html
as of 2023-11-29 [1].
Enable new recommended warnings (except `-Wsign-conversion`):
- enable `-Wformat=2` for clang (in both cmake and autotools).
- add `CURL_PRINTF()` internal attribute and mark functions accepting
printf arguments with it. This is a copy of existing
`CURL_TEMP_PRINTF()` but using `__printf__` to make it compatible
with redefinting the `printf` symbol:
https://gcc.gnu.org/onlinedocs/gcc-3.0.4/gcc_5.html#SEC94
- fix `CURL_PRINTF()` and existing `CURL_TEMP_PRINTF()` for
mingw-w64 and enable it on this platform.
- enable `-Wimplicit-fallthrough`.
- enable `-Wtrampolines`.
- add `-Wsign-conversion` commented with a FIXME.
- cmake: enable `-pedantic-errors` the way we do it with autotools.
Follow-up to d5c0351055#2747
- lib/curl_trc.h: use `CURL_FORMAT()`, this also fixes it to enable format
checks. Previously it was always disabled due to the internal `printf`
macro.
Fix them:
- fix bug where an `set_ipv6_v6only()` call was missed in builds with
`--disable-verbose` / `CURL_DISABLE_VERBOSE_STRINGS=ON`.
- add internal `FALLTHROUGH()` macro.
- replace obsolete fall-through comments with `FALLTHROUGH()`.
- fix fallthrough markups: Delete redundant ones (showing up as
warnings in most cases). Add missing ones. Fix indentation.
- silence `-Wformat-nonliteral` warnings with llvm/clang.
- fix one `-Wformat-nonliteral` warning.
- fix new `-Wformat` and `-Wformat-security` warnings.
- fix `CURL_FORMAT_SOCKET_T` value for mingw-w64. Also move its
definition to `lib/curl_setup.h` allowing use in `tests/server`.
- lib: fix two wrongly passed string arguments in log outputs.
Co-authored-by: Jay Satiro
- fix new `-Wformat` warnings on mingw-w64.
[1] 56c0fde389/docs/Compiler-Hardening-Guides/Compiler-Options-Hardening-Guide-for-C-and-C%2B%2B.mdCloses#12489
- use `data->state.dselect_bits` everywhere instead
- remove `bool *comeback` parameter as non-zero
`data->state.dselect_bits` will indicate that IO is
incomplete.
Closes#12512
GCC 14 introduces a new -Walloc-size included in -Wextra which gives:
```
src/tool_operate.c: In function ‘add_per_transfer’:
src/tool_operate.c:213:5: warning: allocation of insufficient size ‘1’ for type ‘struct per_transfer’ with size ‘480’ [-Walloc-size]
213 | p = calloc(sizeof(struct per_transfer), 1);
| ^
src/var.c: In function ‘addvariable’:
src/var.c:361:5: warning: allocation of insufficient size ‘1’ for type ‘struct var’ with size ‘32’ [-Walloc-size]
361 | p = calloc(sizeof(struct var), 1);
| ^
```
The calloc prototype is:
```
void *calloc(size_t nmemb, size_t size);
```
So, just swap the number of members and size arguments to match the
prototype, as we're initialising 1 struct of size `sizeof(struct
...)`. GCC then sees we're not doing anything wrong.
Closes#12292
This PR has these changes:
Renaming of unencode_* to cwriter, e.g. client writers
- documentation of sendf.h functions
- move max decode stack checks back to content_encoding.c
- define writer phase which was used as order before
- introduce phases for monitoring inbetween decode phases
- offering default implementations for init/write/close
Add type paramter to client writer's do_write()
- always pass all writes through the writer stack
- writers who only care about BODY data will pass other writes unchanged
add RAW and PROTOCOL client writers
- RAW used for Curl_debug() logging of CURLINFO_DATA_IN
- PROTOCOL used for updates to data->req.bytecount, max_filesize checks and
Curl_pgrsSetDownloadCounter()
- remove all updates of data->req.bytecount and calls to
Curl_pgrsSetDownloadCounter() and Curl_debug() from other code
- adjust test457 expected output to no longer see the excess write
Closes#12184
- cache more Windows config results for faster initialization.
- delete unused config macros `HAVE_SYS_UTSNAME_H`, `HAVE_SSL_H`.
- delete dead references to `sys/utsname.h`.
Closes#11551
