When doing line ending conversions, and a chunk contains no '\n', the
function returned early without updating prev_cr to reflect the last
byte. It could then lead to CRLFs sequences not get converted when
occuring right on the boundary border.
Found by Codex Security
Closes#21221
This allows builds know about all schemes - but only have the protocol
implementations for those actually built-in.
It further allows multiple protocols to reuse the same protocol setup
and functions for both TLS and non-TLS implementations instead of
needing two (or more) structs.
The scheme information is now in 'struct Curl_scheme' and all the
function pointers for each scheme/protocol implementation are in struct
Curl_protocol.
The URL API now always work with all known protocols.
Closes#20351
Add casts to `bool`, or use `bit` type in local variables, where
neccessary to avoid MSVC compiler warnings C4242.
Note: There may remain places needing the above updates, where not
tested in CI, and missed in manual review.
Also:
- urldata: convert struct field `connect_only` to bitfield to match its
counterpart in another struct.
- rename curl-specific `bit` type to `curl_bit`.
Closes#20142
When a download size is known and rate limiting is in effect, adjust the
duration of each measurement step and its rate for maximum precision.
Since it is unpredictable how long the last bytes of a download will
take, download speed can be thrown off if the "last bytes" are a
significant amount of the total download. Make the "last bytes" small in
comparision to the rest and "stretch" the rate limit intervals to
accommodate the difference.
Fix ngtcp2 receive data acknowldgements to be based on a local window
size tracking. This allows window updates controlled by rate limits.
Fix ratelimit wait time calculation to accomodate negative tokens.
h3 rate limit, update timeers
Make download rate limits work correctly in ngtcp2. Fix multi handling
of rate limits to set a timer for when limits will update again.
Without running the transfer on limit updates, protocols like h2/h3 may
stall if the server does not send due to stream windows being too small.
scorecard: measure download speedlimits
When running scorecard with --limit-rate=n, show the reported download
speed averages plus percentage deviation from the limit.
Closes#20228
Most by moving functions around. Also delete unused ones.
Reducing their number from 83 to 33.
Remaining ones due to:
- circular dependencies.
- H3 code, that I did not attempt to update and likely the above applies.
- static declarations with attributes (`CURL_PRINTF`, `WARN_UNUSED_RESULT`).
- OS400 code.
Closes#20321
- asyn-thrdd.c: scope an include.
- apply more clang-format suggestions.
- tidy-up PP guard comments.
- delete empty line from the top of headers.
- add empty line after `curl_setup.h` include where missing.
- fix indent.
- CODE_STYLE.md: add `strcpy`.
Follow-up to 8636ad55df#20088
- lib1901.c: drop unnecessary line.
Follow-up to 436e67f65b#20076Closes#20070
- drop unused `http.h` includes.
- drop unused `http1.h` include.
- drop unused `http2.h` includes.
- vssh/ssh.h: drop unused `vssh.h` include.
- urldata.h: drop unused protocol includes.
- url: include `smtp.h` directly.
- rtsp.h: include directly where used.
- imap, smtp: drop redundant include, move another from .h to .c.
Verified with an all non-unity CI run.
Closes#20093
- replace `sendf.h` with `curl_trc.h` where it was included just for it.
- drop unused `curl_trc.h` includes.
- easy: delete obsolete comment about `send.h` include reason.
Also:
- move out `curl_trc.h` include from `sendf.h` and include it directly
in users, where not done already. To flatten the include tree and
to less rely on indirect includes.
- stop including `sendf.h` from other headers, replace it with forward
declaration of `Curl_easy`, as done already elsewhere.
Verified with an all non-unity CI run.
Closes#20061
To make it available for all files. Drop includes from individual
sources. This header was already included from most sources and not
specific to any internal subsystem.
Also to ensure that two system symbol redefines on Windows (`read()` and
`write()`) get applied to all sources. Move them to `curl_setup.h`.
Closes#20056
- curl_range: replace `sendf.h` with direct header dependency
`curl_trc.h`.
- drop `curl/curl.h` includes from internal sourcees in favor of the
include made from `curl_setup.h`. Replace it with the latter where
it's the only include.
- include `curl_setup.h` before using macros, where missing.
- drop redundant `stdlib.h`, `string.h` includes, in favor of
`curl_setup_once.h` including them.
- drop redundant `limits.h` in favor of `curl_setup.h` including it.
- fake_addrinfo.h: fix typo in comment.
- curl_setup_once.h: drop `stdio.h` in favor of earlier include in
`curl_setup.h`.
- drop stray, unused, `stddef.h` includes.
- memdebug.h: add missing `stddef.h` include. (relying on accidental
includes via other headers before this patch.)
- stddef.h: document why it's included.
- strerr: drop `curl/mprintf.h` in favor of `curl/curl.h` including it
via `curl_setup.h`.
Closes#20027
Always use curlx_now() when calling Curl_pgrs_now(data). Tests with the
"manual" updates to now proved differ more then 100ms in parallel testing.
Add `curlx_nowp()` to set current time into a struct curltime.
Add `curlx_ptimediff_ms() and friends, passing pointers.
Update documentation.
Closes#19998
Use `data->progress.now` as the timestamp of proecssing a transfer.
Update it on significant events and refrain from calling `curlx_now()`
in many places.
The problem this addresses is
a) calling curlx_now() has costs, depending on platform. Calling it
every time results in 25% increase `./runtest` duration on macOS.
b) we used to pass a `struct curltime *` around to save on calls, but
when some method directly use `curx_now()` and some use the passed
pointer, the transfer experienes non-linear time. This results in
timeline checks to report events in the wrong order.
By keeping a timestamp in the easy handle and updating it there, no
longer invoking `curlx_now()` in the "lower" methods, the transfer
can observer a steady clock progression.
Add documentation in docs/internals/TIME-KEEPING.md
Reported-by: Viktor Szakats
Fixes#19935Closes#19961
Before this patch curl used the C preprocessor to override standard
memory allocation symbols: malloc, calloc, strdup, realloc, free.
The goal of these is to replace them with curl's debug wrappers in
`CURLDEBUG` builds, another was to replace them with the wrappers
calling user-defined allocators in libcurl. This solution needed a bunch
of workarounds to avoid breaking external headers: it relied on include
order to do the overriding last. For "unity" builds it needed to reset
overrides before external includes. Also in test apps, which are always
built as single source files. It also needed the `(symbol)` trick
to avoid overrides in some places. This would still not fix cases where
the standard symbols were macros. It was also fragile and difficult
to figure out which was the actual function behind an alloc or free call
in a specific piece of code. This in turn caused bugs where the wrong
allocator was accidentally called.
To avoid these problems, this patch replaces this solution with
`curlx_`-prefixed allocator macros, and mapping them _once_ to either
the libcurl wrappers, the debug wrappers or the standard ones, matching
the rest of the code in libtests.
This concludes the long journey to avoid redefining standard functions
in the curl codebase.
Note: I did not update `packages/OS400/*.c` sources. They did not
`#include` `curl_setup.h`, `curl_memory.h` or `memdebug.h`, meaning
the overrides were never applied to them. This may or may not have been
correct. For now I suppressed the direct use of standard allocators
via a local `.checksrc`. Probably they (except for `curlcl.c`) should be
updated to include `curl_setup.h` and use the `curlx_` macros.
This patch changes mappings in two places:
- `lib/curl_threads.c` in libtests: Before this patch it mapped to
libcurl allocators. After, it maps to standard allocators, like
the rest of libtests code.
- `units`: before this patch it mapped to standard allocators. After, it
maps to libcurl allocators.
Also:
- drop all position-dependent `curl_memory.h` and `memdebug.h` includes,
and delete the now unnecessary headers.
- rename `Curl_tcsdup` macro to `curlx_tcsdup` and define like the other
allocators.
- map `curlx_strdup()` to `_strdup()` on Windows (was: `strdup()`).
To fix warnings silenced via `_CRT_NONSTDC_NO_DEPRECATE`.
- multibyte: map `curlx_convert_*()` to `_strdup()` on Windows
(was: `strdup()`).
- src: do not reuse the `strdup` name for the local replacement.
- lib509: call `_strdup()` on Windows (was: `strdup()`).
- test1132: delete test obsoleted by this patch.
- CHECKSRC.md: update text for `SNPRINTF`.
- checksrc: ban standard allocator symbols.
Follow-up to b12da22db1#18866
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814
Follow-up to 9678ff5b1b#18776
Follow-up to 10bac43b87#18774
Follow-up to 20142f5d06#18634
Follow-up to bf7375ecc5#18503
Follow-up to 9863599d69#18502
Follow-up to 3bb5e58c10#17827Closes#19626
* move the TIMER_POSTQUEUE to the time a connection is chosen,
so that TIMER_NAMELOOKUP always happens afterwards
* client writer: do not trigger TIMER_STARTTRANSFER on CLIENTWRITE_INFO
as ftp and other pingpong protocols write that before starting anything
that is the tranfer itself
* Elimnating debug trancing of "closed stream/connection - bailing"
as confusing, as connection is not really closed on most cases.
* Setting 'data->req.upload_done` correctly, so that no "abort upload"
is happening at the end of a perfectly fine download.
* Adding test cases with up-/download of 0-length files.
* pytest: add a "timeline" of timer value checks to Resulst in curl.py,
so that this can be used in several test cases, replacing the local
stuff in test_16
* add timeline checks to ftp test cases
Closes#19269
Description of how this works in `docs/internal/RATELIMITS.ms`.
Notable implementation changes:
- KEEP_SEND_PAUSE/KEEP_SEND_HOLD and KEEP_RECV_PAUSE/KEEP_RECV_HOLD
no longer exist. Pausing is down via blocked the new rlimits.
- KEEP_SEND_TIMED no longer exists. Pausing "100-continue" transfers
is done in the new `Curl_http_perform_pollset()` method.
- HTTP/2 rate limiting implemented via window updates. When
transfer initiaiting connection has a ratelimit, adjust the
initial window size
- HTTP/3 ngtcp2 rate limitin implemnented via ack updates
- HTTP/3 quiche does not seem to support this via its API
- the default progress-meter has been improved for accuracy
in "current speed" results.
pytest speed tests have been improved.
Closes#19384
Add new functions in `curlx/warnless.h` for controlled type
conversions:
* curlx_uitouz, convert unsigned into to size_t (should always work)
* curlx_uztoso, convert size_t to curl_off_t, capping at CURL_OFF_T_MAX
* curlx_sztouz, convert ssize_t to size_t, return TRUE when ok
* curlx_sotouz_range, convert curl_off_t to size_t interval, capping
values to interval bounds
Remove some unnecesary casts, convert some internal recv functions
to the "return result, have size_t* arg" pattern.
Closes#19495
Some internal functions always return CURLE_OK.
- Curl_http_proxy_get_destination() does that from bb4032a, (2 years
ago) And the original inline code does not need to check the status.
- Curl_wildcard_init() does that from e60fe20. (8 years ago)
- Curl_initinfo() does that from a very beginning.
- Curl_pgrsSetDownloadCounter() did not have a return before 914e49b,
ad051e1 recovered its content (2 years ago) but did not completely
recovered the changes related to it.
- auth_digest_get_qop_values() does that from 676de7f.
This directly changes their type to void and cleaned the remaining
checks for their return value.
Closes#19386
After this patch, the codebase no longer overrides system printf
functions. Instead it explicitly calls either the curl printf functions
`curl_m*printf()` or the system ones using their original names.
Also:
- drop unused `curl_printf.h` includes.
- checksrc: ban system printf functions, allow where necessary.
Follow-up to db98daab05#18844
Follow-up to 4deea9396b#18814Closes#18866
`-Weverything` is not enabled by curl, and not recommended by LLVM,
because it may enable experimental options, and will result in new
fallouts after toolchain upgrades. This patch aims to fix/silence as much
as possible as found with llvm/clang 21.1.0. It also permanently enables
warnings that were fixed in source and deemed manageable in the future.
`-Wformat` warnings are addressed separately via #18343.
Fix/silence warnings in the source:
- typecheck-gcc.h: fix `-Wreserved-identifier`.
- lib: silence `-Wcast-function-type-strict`.
For llvm 16+ or Apple clang 16+.
- asyn-ares: limit `HAPPY_EYEBALLS_DNS_TIMEOUT` to old c-ares versions.
- curl_trc: fix `-Wc++-hidden-decl`.
- doh: fix `-Wc++-keyword`.
- ftp: fix `-Wreserved-identifier`.
- ldap: fix `-Wreserved-identifier`.
- mqtt: comment unused macro to avoid warning.
- multi_ev: drop unused macros to avoid warnings.
- setopt: fix useless `break;` after `return;`.
- gtls, mbedtls, rustls: silence `-Wconditional-uninitialized`.
- socks_sspi, schannel, x509asn1: fix `-Wimplicit-int-enum-cast`.
- x509asn1: fix `-Wc++-keyword`.
- openssl: scope `OSSL_UI_METHOD_CAST` to avoid unused macro warning.
- libssh2, wolfssl: drop unused macros.
- curl_ngtcp2, curl_quiche, httpsrr, urlapi: drop/limit unused macros.
- tool_getparam: fix useless `break;` after `return;` or `break;`.
Not normally enabled because it doesn't work with unity.
https://github.com/llvm/llvm-project/issues/71046
- tool_operate: fix `-Wc++-keyword`.
- curlinfo: fix a `-Wunsafe-buffer-usage`.
- tests: silence `-Wformat-non-iso`.
- lib557: fix `-Wreserved-identifier`.
- lib1565: silence `-Wconditional-uninitialized`.
Enable the above clang warnings permanently in picky mode:
- `-Wc++-hidden-decl`
- `-Wc++-keyword` (except for Windows, where it collides with `wchar_t`)
- `-Wcast-function-type-strict`
- `-Wcast-function-type`
- `-Wconditional-uninitialized`
- `-Wformat-non-iso` (except for clang-cl)
- `-Wreserved-identifier`
- `-Wtentative-definition-compat`
Silence problematic `-Weverything` warnings globally (in picky mode):
- `-Wused-but-marked-unused` (88000+ hits) and
`-Wdisabled-macro-expansion` (2600+ hits).
Triggered by `typecheck-gcc.h` when building with clang 14+.
Maybe there exists a way to fix within that header?
Ref: https://discourse.llvm.org/t/removing-wused-but-marked-unused/55310
- `-Wunsafe-buffer-usage`. clang 16+. 7000+ hits.
May be useful in theory, but such high volume of hits makes it
impractical to review and possibly address. Meant for C++.
Ref: https://clang.llvm.org/docs/SafeBuffers.html
Ref: https://stackoverflow.com/questions/77017567/how-to-fix-code-to-avoid-warning-wunsafe-buffer-usage
Ref: https://discourse.llvm.org/t/rfc-c-buffer-hardening/65734
Ref: https://github.com/llvm/llvm-project/pull/111624
- `-Wimplicit-void-ptr-cast`. clang 21+. 1700+ hits.
C++ warning, deemed pure noise.
Ref: https://github.com/curl/curl/issues/18470#issuecomment-3253506266
- `-Wswitch-default` (180+ hits), `-Wswitch-enum` (190+ hits),
`-Wcovered-switch-default` (20+ hits).
Next to impossible to fix cleanly, esp. when the covered `case`
branches depend on compile-time options.
- `-Wdocumentation-unknown-command` (8+ hits).
Triggered in a few sources. Seems arbitrary and bogus.
- `-Wpadded` (550+ hits).
- `-Wc++-keyword` on Windows, where it collides with `wchar_t`.
(100+ hits)
Ref: https://github.com/llvm/llvm-project/issues/155988
- `-Wreserved-macro-identifier`. clang 13+. 5+ hits.
Sometimes it's necessary to set external macros that use
the reserved namespace. E.g. `_CRT_NONSTDC_NO_DEPRECATE`,
`__ENVIRONMENT_MAC_OS_X_VERSION_MIN_REQUIRED__`, `__NO_NET_API`,
possibly `_REENTRANT`, and more.
It's not worth trying to silence them individually.
- `-Wnonportable-system-include-path` with `clang-cl`.
It'd be broken by doing what the warning suggests.
- `-Wformat-non-iso` for clang-cl.
CMake `PICKY_COMPILER=ON` (the default) or `./configure`
`--enable-warnings` (not the default) is required to enable these
silencing rules.
Also:
- autotools, cmake: fix Apple clang and mainline llvm version translations.
Ref: https://en.wikipedia.org/wiki/Xcode#Toolchain_versions
- autotools, cmake: enable `-Warray-compare` for clang 20+.
Follow-up to 4b7accda5a#17196
- cmake: fix to enable `-Wmissing-variable-declarations` at an earlier
clang version.
- cmake: update internal logic to handle warning options with `+` in
them.
- cmake: fix internal logic to match the whole option when looking
into `CMAKE_C_FLAGS` for custom-disabled warnings.
Follow-up to b85cb8cb4e#18485Closes#18477
Write out 9-length frames to client's WRITEFUNCTION
Read 0-length frames from READFUNCTION *if* the function
started a new frame via `curl_ws_start_frame()`.
Fixes#18286Closes#18332
Reported-by: Andriy Druk
Easily triggered when doing an FTP ranged download with the end range
larger than the file size.
A regression since 30de937bda (shipped in curl 8.9.0)
Add test 2307 to verify.
Reported-by: kupavcevdenis on github
Fixes#18283Closes#18295
Concentrate the handling of KEEP_RECV_PAUSE and KEEP_SEND_PAUSE into
common transfer functions. Setting or clearing these bits requires
subsequent actions involving connection events and client reader/writer
notifications. Have it in one place.
Closes#17650
Move curlx_ functions into its own subdir.
The idea is to use the curlx_ prefix proper on these functions, and use
these same function names both in tool, lib and test suite source code.
Stop the previous special #define setup for curlx_ names.
The printf defines are now done for the library alone. Tests no longer
use the printf defines. The tool code sets its own defines. The printf
functions are not curlx, they are publicly available.
The strcase defines are not curlx_ functions and should not be used by
tool or server code.
dynbuf, warnless, base64, strparse, timeval, timediff are now proper
curlx functions.
When libcurl is built statically, the functions from the library can be
used as-is. The key is then that the functions must work as-is, without
having to be recompiled for use in tool/tests. This avoids symbol
collisions - when libcurl is built statically, we use those functions
directly when building the tool/tests. When libcurl is shared, we
build/link them separately for the tool/tests.
Assisted-by: Jay Satiro
Closes#17253
The line conversion reader, added in crfl and prefer_ascii mode was
incrementing data->state.infilesize for every line end converted. This
results in the wrong size to start a retry of an upload.
Eliminate the increment and check upload size in FTP less precise when
conversions are done.
Bug: https://issues.oss-fuzz.com/issues/402476456Closes#16683
The issues found fell into these categories, with the applied fixes:
- const was accidentally stripped.
Adjust code to not cast or cast with const.
- const/volatile missing from arguments, local variables.
Constify arguments or variables, adjust/delete casts. Small code
changes in a few places.
- const must be stripped because an API dependency requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our control. These happen at API boundaries. Sometimes they depend
on dependency version, which this patch handles as necessary. Also
enable const support for the zlib API, using `ZLIB_CONST`. Supported
by zlib 1.2.5.2 and newer.
- const must be stripped because a curl API requires it.
Strip `const` with `CURL_UNCONST()` macro to silence the warning out
of our immediate control. For example we promise to send a non-const
argument to a callback, though the data is const internally.
- other cases where we may avoid const stripping by code changes.
Also silenced with `CURL_UNCONST()`.
- there are 3 places where `CURL_UNCONST()` is cast again to const.
To silence this type of warning:
```
lib/vquic/curl_osslq.c:1015:29: error: to be safe all intermediate
pointers in cast from 'unsigned char **' to 'const unsigned char **'
must be 'const' qualified [-Werror=cast-qual]
lib/cf-socket.c:734:32: error: to be safe all intermediate pointers in
cast from 'char **' to 'const char **' must be 'const' qualified
[-Werror=cast-qual]
```
There may be a better solution, but I couldn't find it.
These cases are handled in separate subcommits, but without further
markup.
If you see a `-Wcast-qual` warning in curl, we appreciate your report
about it.
Closes#16142
Adds a "cw-pause" client writer in the PROTOCOL phase that buffers
output when the client paused the transfer. This prevents content
decoding from blowing the buffer in the "cw-out" writer.
Added test_02_35 that downloads 2 100MB gzip bombs in parallel and
pauses after 1MB of decoded 0's.
This is a solution to issue #16280, with some limitations:
- cw-out still needs buffering of its own, since it can be paused
"in the middle" of a write that started with some KB of gzipped
zeros and exploded into several MB of calls to cw-out.
- cw-pause will then start buffering on its own *after* the write
that caused the pause. cw-pause has no buffer limits, but the
data it buffers is still content-encoded.
Protocols like http/1.1 stop receiving, h2/h3 have window sizes,
so the cw-pause buffer should not grow out of control, at least
for these protocols.
- the current limit on cw-out's buffer is ~75MB (for whatever
historical reason). A potential content-encoding that blows 16KB
(the common h2 chunk size) into > 75MB would still blow the buffer,
making the transfer fail. A gzip of 0's makes 16KB into ~16MB, so
that still works.
A better solution would be to allow CURLE_AGAIN handling in the client
writer chain and make all content encoders handle that. This would stop
explosion of encoding on a pause right away. But this is a large change
of the deocoder operations.
Reported-by: lf- on github
Fixes#16280Closes#16296
lib : remove all hyper code
configure: stop detecting hyper
docs: no more mention of hyper
tests: mo more special-handling of hyper builds
CI: no jobs using hyper
Closes#15120
booleans should use the type 'bool' and set the value to TRUE/FALSE
non-booleans should not be 'bool' and should not set the value to
TRUE/FALSE
Closes#15123
